Tô vít cân lực cố định PB Swiss Tools

PB 8324 A, with set torque value, triggering torque 100% higher than tightening torque. Users with a corresponding measuring instrument can set or recalibrate the triggering value themselves to a specific range (with long hexagon key 3 mm). Precision ± 6% in accordance with EN ISO 6789. Supplied with factory test certificate, without replacement blades PB 225.

Appropriate accessories:
336020 Screwdriver blade PB Swiss Tools
336030 Phillips blade PB Swiss Tools
336035 Pozidriv blade PB Swiss Tools
336040 Allen key blade PB Swiss Tools
336050 Socket wrench blade PB Swiss Tools
336055 TORX® blade PB Swiss Tools
336060 Interchangeable blade with magnetic bit holder PB Swiss Tools
336061 Interchangeable blade with square drive PB Swiss Tools

tag: pb8324a

Made in Switzerland

Máy đo momen xoắn điện tử GEDORE

For checking and setting clockwise and anticlockwise torque tools; compact, solid design, accuracy ±2% of every value within 20...100% of the measuring range, in accordance with DIN/ISO 6789, with factory test certificate.

Made in United kingdom

Máy đo momen xoắn điện tử GEDORE

Dremotest-E, rugged, easy-to-use torque tester for workshop and maintenance applications, for testing right-handed torque wrenches, measurement mode: First peak value, units of measurement: Nm, lbf-ft, mounted on attached base plate, mains operation, data output via RS-232 (output in standard ASCII format), accuracy of ±1% over the full measuring range. Package contents: Power supply, 2 socket wrench adapters, RS-232 cable, factory test certificate.

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR TruCheck 2

Norbar TruCheck 2, extremely easy-to-use instrument for testing clockwise torque screwdrivers and "click-type" torque wrenches (first peak mode). Unit of measurement: Nm; just one button for zeroing, thereby removing the risk of incorrect operation almost entirely. Power supplied via micro USB 2.0 port on the device itself. Accuracy of ±1% across the entire measuring range. Mains adapter and factory test certificate included in delivery. Two M6 8.8 hexagon screws are required for attaching to a table (not included in delivery).

Tags: TruCheck2

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR

Precise and easy to operate instrument for testing and calibration of clockwise torque wrenches; complies with BS 7882:1997, class 1 (± 0.5%) or better over the primary calibration range (20%-100% of the measurement range), class 2 (± 1%) or better over the secondary calibration range (from smallest calibration value to 20% of the measurement range). Pictogram keys for easy selection of the operating modes: "Travelling", "Save peak value" and "First peak value" for "click&wrenches", manual and automatic reset; tolerance value input, integrated calibration mode ISO 6789 and printing out the test report. Large display unit with back light; with all of the usual units; can be set to most European languages; can be used horizontally or vertically; with RS-232-C interface for connection to printer, PC, data capture device, SPC, etc.; all parameters can be selected via menus. Supplied in transport case, with connecting cable RS-232 and SCS-recognised test certificate (clockwise calibrated).

Appropriate accessories:
327982 Socket adapter STAHLWILLE
329622 Socket adapter STAHLWILLE
332310 Wall holder NORBAR


Additional calibration for anti clockwise direction tests for an extra charge.

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR TruCheck 2 Plus

Norbar TruCheck 2 Plus, extremely easy-to-use instrument for testing clockwise torque screwdrivers and "click-type" torque wrenches. Various units of measurement and three operating modes (click, dial and track). Power supplied via micro USB 2.0 port with additional option of transferring measured data directly to a PC. Target torque and tolerances for analysing the measured value can be specified individually, and are presented and analysed on a three-coloured (red, yellow, green) display. Accuracy of ±1% across the entire measuring range. Mains adapter and factory test certificate included in delivery. Two M6 8.8 hexagon screws are required for attaching to a table (not included in delivery).

Tags: TruCheck2plus

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR

Norbar TruCheck 2, extremely easy-to-use instrument for testing right-handed "click" torque wrenches (first peak mode). Unit of measurement: Nm; just one button for zeroing, thereby removing the risk of incorrect operation almost entirely. Power supplied via micro USB 2.0 port on the device itself. Accuracy of ±1% across the entire measuring range. Mains adapter and factory test certificate included in delivery. Two M10 12.9 hexagon screws are required for attaching to a table (not included in delivery).

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR

Norbar TruCheck 2 Plus, extremely easy-to-use instrument for testing right-handed torque wrenches. Various units of measurement and three operating modes (click, dial and track). Power supplied via micro USB 2.0 port with additional option of transferring measured data directly to a PC. Target torque and tolerances for analysing the measured value can be specified individually, and are presented and analysed on a three-coloured (red, yellow, green) display. Accuracy of ±1% across the entire measuring range. Mains adapter and factory test certificate included in delivery. Two M10 12.9 hexagon screws are required for attaching to a table (not included in delivery).

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR

Norbar TST, testing and adjustment device for static and dynamic torque measurements. With internal transducer, accuracy ±0.5% of the measurement value within 20-100% of the measurement range, for testing of assembly tools and with connection for an external transducer (measurement range 0.05 - 3,000 Nm). Graphics-capable display with easy selection of the various modes, tolerance value input, 5-digit resolution. With RS-232 data output and automatic transducer detection with SMART transducers. Supplied with joint simulator for testing mechanical screwdrivers, SCS-recognized test certificate and RS-232 data cable (calibrated clockwise).

Appropriate accessories:
332380 Static transducer NORBAR FMT
332605 Tester NORBAR

Made in United kingdom

Máy đo momen xoắn điện tử NORBAR

Norbar TTT, testing and adjustment device for static and dynamic torque measurements, with 3 ports for external transducers. Accuracy ±0.5% of the measurement value within 20-100% of the measurement range, for testing of assembly tools . Graphics-capable display with easy selection of the various modes, tolerance value input, 5-digit resolution. With RS-232 data output and automatic transducer detection with SMART transducers. With SCS-recognized test certificate (calibrated clockwise), RS-232 data cable included.

Appropriate accessories:
332380 Static transducer NORBAR FMT, 332605 Tester NORBAR
 

Made in United kingdom

Máy đo momen xoắn điện tử STAHLWILLE

Stahlwille SmartCheck, electronic workshop test device. Thanks to its compact dimensions and horizontal or vertical mounting option as well as the rotating display it can fit in almost anywhere. Display, display bracket and base frame can rotate 180°. Easy-to-understand operation and user guidance for faster work, reliable results and a high level of safety. Optical and audible overload warning. Integrated measurement transducer with an accuracy of ± 1% of the respective measured value. Three different operating modes (Track, First Peak, Peak Hold) and three units (Nm, ft-lb, in-lb). Target torque and tolerances for the evaluation of the measured value can be specified individually. In addition to traditional operation via a power supply, battery operation is also possible (4 x AAA or 1 x 9V, adapter included). Display and membrane keyboard are splashproof, the housing is made of impact-resistant plastic. Supplied with robust transport box, mains adapter and factory test certificate.

Designs:
332440.0100: for testing of indicating and clicking torque screwdrivers
332440.0200...332440.0500: for testing of indicating and clicking torque wrenches

Made in Germany

Máy đo momen xoắn điện tử STAHLWILLE

Stahlwille Sensotork 7707 W, electronic shop tester for clockwise and anticlockwise measurements, compact, can be used as a mobile laboratory (power supply via USB), not sensitive to transverse forces thanks to flat design. The device can be installed horizontally or vertically. With the optionally available software the measurement data can be processed into a DIN EN ISO 6789 compliant calibration certificate.
Exchangeable transducer, conditioning and digitizing of measurement values in the transducer, automatic detection, acoustic overload warning, for clockwise and anticlockwise measurement, various operating modes such as continuous display, peak value, "first peak" and additional display of the torque actually applied, accuracy up to ± 0.25% of the specific measurement value, incl. 230V power supply unit, base and cable (1.5 m) for alternative fastening of the display unit. Conforms to DIN 51309, class 2, with calibration certificate included.

Appropriate accessories:
332452 Static transducer STAHLWILLE, 332455 USB adapter cable with software STAHLWILLE, 332610 Torque wrench tester STAHLWILLE, 332614 Extension for calibrating unit STAHLWILLE

Made in Germany

Máy đo momen xoắn điện tử STAHLWILLE

Device for testing of torque wrenches. During testing, the wrench is not triggered by hand, but rather by means of a hand wheel. Only in this manner is it possible to determine the wrench's deviation from the setpoint value and repeatability with absolute reliability. Without torque tester and transducer.

Usable with:
332450 Electronic torque tester STAHLWILLE

Other testers on request.

Made in Germany

Cờ lê cân lực điện tử chạy pin MILWAUKEE M12 ONEFTR12-201C

Milwaukee M12 ONEFTR12-201C, cordless digital torque wrench with 1/2" square drive and a tolerance accuracy of ±2% for high-precision applications. Accelerates the fastening process by up to 50% compared to hand-held tools. Fast torque reporting using ONE-KEY™ to generate reports for testers or owners. Four types of alert (audible, LED light, display and vibration) indicate that the tool is reaching, has met or has exceeded the set target torque. Adjustable tightening torque to prevent over-torqueing, four available torque units (ft-lb, in-lb, Nm, kg-cm) and 15 predefined torque settings. Robust design meets the highest demands on the construction site. 100% system compatible with the MILWAUKEE® M12™ product range.

Scope of delivery:
432670.0100 Cordless torque wrench MILWAUKEE M12 ONEFTR12-201C, 1 x 2.0 Ah Li-ion battery M12 B2, 1 x C12 C charger, carry case

Tags: M12ONEFTR12201C

Made in Usa

Cờ lê cân lực điện tử chạy pin MILWAUKEE M12 ONEFTR38-201C

Milwaukee M12 ONEFTR38-201C, cordless digital torque wrench with 3/8" square drive and a tolerance accuracy of ±2% for high-precision applications. Accelerates the fastening process by up to 50% compared to hand-held tools. Fast torque reporting using ONE-KEY™ to generate reports for testers or owners. Four types of alert (audible, LED light, display and vibration) indicate that the tool is reaching, has met or has exceeded the set target torque. Adjustable tightening torque to prevent over-torqueing, four available torque units (ft-lb, in-lb, Nm, kg-cm) and 15 predefined torque settings. Robust design meets the highest demands on the construction site. 100% system compatible with the MILWAUKEE® M12™ product range.

Scope of delivery:
432675.0100 Cordless torque wrench MILWAUKEE M12 ONEFTR38-201C, 1 x 2.0 Ah Li-ion battery M12 B2, 1 x C12 C charger, carry case

Tags: M12ONEFTR38201C

Made in Usa

Cờ lê cân lực điện tử TOP

Features
Both right and left directions can be measured.
The LCD backlight allows you to see the measured values ​​even when working in dark places.
Measured torque values ​​(in peak hold mode) can be recorded.
The arrival of the target torque value is notified by the lighting of the LED and the sound.
With 72 gears and a ratchet drive angle of 5°, the swing width is small, making it possible to work in narrow spaces.
It is compact with a round head.
Usage
Bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.
For tightening that requires torque management, measurement of return torque, etc.

Made in Japan

Bộ cờ lê lực ASAHI LCR

Features
A set containing a torque wrench body and connecting parts.
Usage
Connect to a torque wrench for tightening hexagon bolts and nuts.

Tags: LCR2000, LCR3000, LCR4000

Made in Japan

Bộ cờ lê lực ASAHI LCS

Features
A set containing a torque wrench body and connecting parts.
Usage
Connect to a torque wrench for tightening hexagon bolts and nuts.

Tags: LCS2000, LCS3000, LCS4000

Made in Japan

Bộ cờ lê lực ASAHI LCV

Features
A set containing a torque wrench body and connecting parts.
Usage
Used for tightening hexagon bolts and nuts by connecting to a torque wrench

Tags: LCV2000, LCV3000, LCV4000

Made in Japan