Đĩa mài làm sạch SCOTCH-BRITE, 3M CPW 

Convolutely wound disc, aluminium oxide abrasive; for deburring and satining, for producing a decorative finish, satining, deburring, for fine work on stainless and acid-resistant steels, light metals, non-ferrous metals, finish-machining after cutting operations.

Made in France

Đĩa mài làm sạch SCOTCH-BRITE, 3M LD-WL

Convolutely wound disc, silicon carbide grit.Highly adaptable, suitable for all ferrous and non-ferrous metals; durable, high cutting performance, high edge stability. For deburring and rounding of machine parts, piston rings, aluminium profiled strips, gear wheels, gear racks, surgical instruments, thread runouts; micro deburring of precision parts.

Made in Usa

Đĩa mài làm sạch SCOTCH-BRITE, 3M DB-WL

Convolutely wound disc, silicon carbide grit. All-purpose deburring disc for nearly all metals, including hard and tough materials such as stainless steel (INOX), titanium. The open non-woven structure produces even rounding of the burr. For deburring and rounding of edges, boreholes, milled or punched edges, deburring after tapping.

Made in France

Đĩa mài làm sạch SCOTCH-BRITE, 3M FS-WL

Convolutely wound disc, grit aluminium oxide (A), silicon carbide (S). For fine work; either a conspicuous brushed finish or a fine, even scratch pattern can be created, depending on hardness and fineness grade; suitable for all metals.

Made in Usa

Đĩa mài làm sạch SCOTCH-BRITE, 3M CG-ZS

Blue, flexible coarse cleaning disc with shaft; removes corrosion, paint and coatings, extremely flexible and adaptive, does not alter the surface texture of the workpiece.

Made in Belgium

Đĩa mài làm sạch SCOTCH-BRITE

Scotch Brite XT-ZS Pro, ideally suited for the rapid removal of rust, paint, scale, coatings and adhesives from metals. High-strength fibre, resists chunking and provides optimum edge performance. The sharp silicon carbide mineral and fleece provide a resistant disc without significantly altering the base material during grinding. Low sparking and vibration.

Made in Usa

Đĩa mài làm sạch SCOTCH-BRITE, 3M CG-DC

Blue, flexible coarse cleaning disc for mounting on the extension of a bench grinder or on clamping arbor. Removes corrosion, paint and coatings, extremely flexible and adaptive, does not alter the surface texture of the workpiece.

Made in Belgium

Đĩa mài làm sạch SCOTCH-BRITE, 3M XT-DC

Strengthened, purple aggressive cleaning disc for mounting on the extension of a bench grinder or on clamping arbor. Removes heavy corrosion, rolling scale from hot-rolled steel, stubborn paint layers on metals; optimum results when cleaning welds on stainless steel.

Made in Belgium

Trục lắp đĩa PFERD

For non-woven discs, with holding claws. Reduces setup times considerably. Discs can be changed without unclamping the shaft from the collet of the drive machine. Other sizes with bundling option for clamping 2 or 3 discs are available for supply at short notice.

Made in Germany

Trục lắp đĩa SCOTCH-BRITE

Designs:

385160.0100 with 3 pairs of supporting washers

385160.0110 3M 82455, for Roloc disc pad with internal thread 1/4" UNC

385160.0200 with 3 pairs of supporting washers

Made in Usa

Đĩa mài làm sạch SCOTCH-BRITE, 3M XT-DB

For removing rust and coatings from surfaces; with fibre back, very adaptable; aggressive work is possible. For use on mini angle grinders with disc pad.

Stock packages 10 pieces

Made in Belgium

Đĩa mài làm sạch SCOTCH-BRITE

(3M SC-DH) For use on angle grinder; for cleaning, rust removal, removal of old paint coats, for roughing of surfaces before painting or gluing; gentler than conventional fibre discs; with hook-and-loop fastener.

Stock package 20 pcs

For adhesive supporting disc, see 385220.

Made in France

Đế lắp đĩa mài 3M

For discs with Velcro fastener.

Made in Germany

Đĩa mài làm sạch BRISTLE DISC, 3M BD-ZB

High-performance cleaning disc for angle grinders, for use on all kinds of metals, paints, etc. Suitable for all cleaning, finishing and light deburring work. Cast construction with cast-in CubitronTM abrasive grain; no loose bristles or wires. Quick and neat cleaning of tough and thick layers, contaminants on metals, hard plastics, etc. The disc can be used until the bristles are completely worn down.

Made in Italy

Đế lắp đĩa mài ROLOC

One half turn is all you need to quickly attach and replace ROLOC fibre disc, abrasive discs and Scotch-Brite discs; several job steps with just a single tool: saves time and costs!

Made in Usa

ROLOC abrasive disc, 3M 984F

Extremely stable fabric disc, CubitronTM II abrasive grain, for steel, INOX/stainless steel, carbon steel, aluminium and titanium. Precision-shaped grain and grinding aid for cooler grinding, self-sharpening grain for even and constant cutting performance with less pressure. Up to 50% greater rates of stock removal, up to 4 times longer life. For work on welds, for grinding away small areas of unevenness, and for deburring. Requires just one half turn to secure firmly to the ROLOC disc pad.

Usable with:

485260 Supporting disc ROLOC

475430 Air pistol sander ATLAS COPCO PRO

475435 Air pistol grinder set 3M ROLOC

Made in Usa

ROLOC abrasive disc, 3M 963G

Extremely stable fabric disc, CubitronTM abrasive grain, for low-carbon steel, grey cast iron, aluminium and non-ferrous metals. For work on welds, for grinding away small areas of unevenness, and for deburring and sanding away paint and coatings. Requires just one half turn to secure firmly to the ROLOC disc pad.

Made in Usa

ROLOC snagging wheel SCOTCH-BRITE, 3M XL-DR

Pressed non-woven disc for a fine finish, especially for deburring on nearly all materials; no secondary burrs. Requires just one half turn to secure firmly to the ROLOC disc pad.

Made in Belgium

ROLOC abrasive wheel SCOTCH-BRITE, 3M SC-DR

All-purpose non-woven disc for finishing and cleaning work on stainless steel (INOX), low-carbon steel. Removes rust, old paint, etc., for light deburring work, for refinishing of ground surfaces; requires just one half turn to secure firmly to the ROLOC disc pad

Made in Belgium