Đĩa mài làm sạch SCOTCH-BRITE, 3M CG-DC

Blue, flexible coarse cleaning disc for mounting on the extension of a bench grinder or on clamping arbor. Removes corrosion, paint and coatings, extremely flexible and adaptive, does not alter the surface texture of the workpiece.

Made in Belgium

Đĩa mài làm sạch SCOTCH-BRITE, 3M XT-DC

Strengthened, purple aggressive cleaning disc for mounting on the extension of a bench grinder or on clamping arbor. Removes heavy corrosion, rolling scale from hot-rolled steel, stubborn paint layers on metals; optimum results when cleaning welds on stainless steel.

Made in Belgium

Trục lắp đĩa PFERD

For non-woven discs, with holding claws. Reduces setup times considerably. Discs can be changed without unclamping the shaft from the collet of the drive machine. Other sizes with bundling option for clamping 2 or 3 discs are available for supply at short notice.

Made in Germany

Trục lắp đĩa SCOTCH-BRITE

Designs:

385160.0100 with 3 pairs of supporting washers

385160.0110 3M 82455, for Roloc disc pad with internal thread 1/4" UNC

385160.0200 with 3 pairs of supporting washers

Made in Usa

Đĩa mài làm sạch SCOTCH-BRITE, 3M XT-DB

For removing rust and coatings from surfaces; with fibre back, very adaptable; aggressive work is possible. For use on mini angle grinders with disc pad.

Stock packages 10 pieces

Made in Belgium

Đĩa mài làm sạch SCOTCH-BRITE

(3M SC-DH) For use on angle grinder; for cleaning, rust removal, removal of old paint coats, for roughing of surfaces before painting or gluing; gentler than conventional fibre discs; with hook-and-loop fastener.

Stock package 20 pcs

For adhesive supporting disc, see 385220.

Made in France

Đế lắp đĩa mài 3M

For discs with Velcro fastener.

Made in Germany

Đĩa mài làm sạch BRISTLE DISC, 3M BD-ZB

High-performance cleaning disc for angle grinders, for use on all kinds of metals, paints, etc. Suitable for all cleaning, finishing and light deburring work. Cast construction with cast-in CubitronTM abrasive grain; no loose bristles or wires. Quick and neat cleaning of tough and thick layers, contaminants on metals, hard plastics, etc. The disc can be used until the bristles are completely worn down.

Made in Italy

Đế lắp đĩa mài ROLOC

One half turn is all you need to quickly attach and replace ROLOC fibre disc, abrasive discs and Scotch-Brite discs; several job steps with just a single tool: saves time and costs!

Made in Usa

ROLOC abrasive disc, 3M 984F

Extremely stable fabric disc, CubitronTM II abrasive grain, for steel, INOX/stainless steel, carbon steel, aluminium and titanium. Precision-shaped grain and grinding aid for cooler grinding, self-sharpening grain for even and constant cutting performance with less pressure. Up to 50% greater rates of stock removal, up to 4 times longer life. For work on welds, for grinding away small areas of unevenness, and for deburring. Requires just one half turn to secure firmly to the ROLOC disc pad.

Usable with:

485260 Supporting disc ROLOC

475430 Air pistol sander ATLAS COPCO PRO

475435 Air pistol grinder set 3M ROLOC

Made in Usa

ROLOC abrasive disc, 3M 963G

Extremely stable fabric disc, CubitronTM abrasive grain, for low-carbon steel, grey cast iron, aluminium and non-ferrous metals. For work on welds, for grinding away small areas of unevenness, and for deburring and sanding away paint and coatings. Requires just one half turn to secure firmly to the ROLOC disc pad.

Made in Usa

ROLOC snagging wheel SCOTCH-BRITE, 3M XL-DR

Pressed non-woven disc for a fine finish, especially for deburring on nearly all materials; no secondary burrs. Requires just one half turn to secure firmly to the ROLOC disc pad.

Made in Belgium

ROLOC abrasive wheel SCOTCH-BRITE, 3M SC-DR

All-purpose non-woven disc for finishing and cleaning work on stainless steel (INOX), low-carbon steel. Removes rust, old paint, etc., for light deburring work, for refinishing of ground surfaces; requires just one half turn to secure firmly to the ROLOC disc pad

Made in Belgium

ROLOC cleaning brush BRISTLE DISC, 3M RD-ZB

High-performance cleaning brush for use on all kinds of metals, paints, etc. Suitable for all cleaning, finishing and light deburring work. Cast construction with cast-in CubitronTM abrasive grain; no loose bristles or wires. Quick and neat cleaning of tough and thick layers, contaminants on metals, hard plastics, etc. The disc can be used until the bristle...

Made in Usa

Đĩa mài làm sạch sia, 6270 siamet SCM

Blaubrand corundum grain, ideally suited for surface grinding, deburring and finishing as preparation for coatings and galvanising, removal of rust, paint and tempering discolouration from aluminium, non-ferrous metals, non-alloyed, low-alloy and high-alloy steels. Much lower tendency to smear than comparable products, particularly at the edge of the disc when working in narrow angles. Universally suitable for dry and wet grinding applications.

Made in United kingdom

Dây đai chà nhám sia, 2820 siamet

Looped, zirconia alumina/aluminium oxide grain, synthetic resin bonded, high edge stability, cool grinding (active additives), high performance in mechanised all-purpose grinding of metal materials.

Made in Switzerland

Dây đai chà nhám VSM, KK711X aluminium oxide A

All-purpose belt for steel, cast iron, non-ferrous metals, aluminium, aluminium alloys, wood. Heavy-duty polyester fabric (P24 - 80), heavy-duty cotton fabric (P100 - 320), resin over resin, for circular grinding, flat grinding, machine grinding, hand-operated machines, hand grinding and robot grinding.

Stock package 10 pcs

Other sizes and grits are available.

Made in Germany

Dây đai chà nhám VITEX, XK760X ceramic grain

High-tech cloth sanding belt for extremely high stock removal rate and service life, self-sharpening ceramic grain on rugged polyester fabric, resin over resin, suitable for wet applications. For curve grinding, flat grinding, automated machine grinding, hand-operated machines, hand grinding and robot grinding; for medium to high contact pressure. Ideal for non-hardened steels up to 1200 N/mm2 (<38 HRC). Very good for hardened steels, stainless and acid-resistant steels, soft and hard non-ferrous metals, high-temperature resistant materials, cast iron.

Stock package of 10

Other sizes and grains are available.

Made in Germany

Dây đai chà nhám 3M

3M 786F Cubitron II, precision-cut high-performance ceramic abrasive grain with up to 4 times the service life; faster work progress thanks to 50% higher removal rates; identical size and uniform orientation of the abrasive grains allow for a finer surface finish compared to conventional file belts; less material distortion and hardly any discolouration thanks to cooler grinding.

Pack of 10

Usable with: 475585 Compressed air belt file set 3M

Made in Usa