Đá mài nhám xếp CUBITRON II, 967A - flat -389020

Flat design; the flap disc is one of the most popular grinding tools in the metalworking industry due to its ergonomics. The 3M™ Cubitron™ II 967A abrasive flap disc allows you to benefit from both the design and sensational performance thanks to 3M™ precision grain. A grinding grain like no other - precision formed, cool grinding and unique ceramic cutting performance thanks to 3M™ precision grain; integrated grinding aid for cooler grinding, particularly on stainless steel; materials: steel, stainless steel, non-ferrous metals

Made in Poland

Đá mài nhám xếp CUBITRON II, 967A- conical -389025

Conical design, precision-moulded, ceramic 3M precision grain and integrated grinding aid for cooler grinding. Suitable for steel, stainless steel and non-ferrous metals.

Made in Poland

Đá mài nhám xếp PFERD, SG CO-FREEZE -389055

Flat design, abrasive, ceramic grain CO with active grinding and cooling special coating (FREEZE), for stainless steel (INOX) and nickel-based alloys (e.g. Inconel and Hastelloy). For surface grinding and work on weld seams. Tool for the most demanding grinding tasks; no discolouration and significantly lower heat transfer into the workpiece than standard flap discs due to the FREEZE coating, aggressive cutting performance over entire service life and outstanding durability. The highly effective fillers form a shiny cooling film on the disc (no "glazing")

Made in Spain

Đá mài nhám xếp POLIFAN, PSF ZIRKON -389060

Flat type, abrasive: zirconia alumina Z, for steel, stainless steel (INOX). Tool for all kinds of demanding grinding applications, for surface grinding and weld dressing. PSF ZIRKON version with aggressive cutting performance and long life. Best stock removal rates are achieved with high-powered angle grinders used at higher application pressures.

Made in Germany

Đá mài nhám xếp POLIFAN, SGP ZIRKON-STRONG -389070

Conical type, abrasive: zirconia alumina Z, for steel. Grit size 36 Ideal for rough work on steel, e.g. weld dressing. Grit size 50 Ideal for edge work, e.g. chamfering, deburring.Fast action, constantly aggressive grinding down to the last grain. Highly economical due to more work done per unit time. Maximum possible rates of material removal. Highly economical because of lower disc consumption. Extremely long life Highly economical due to fewer tool changes and shorter setup times. Takes maximum advantage of the performance of your high-power grinder.Best results are achieved with air turbine grinders and powerful electric angle grinders.

Made in Germany

Đá mài nhám xếp POLIFAN, SGP ZIRKON-CURVE -389080

Conical type, zirconia alumina, extremely long life, for grinding fillet welds in steel and stainless steel (INOX). Fast, aggressive grinding with high metal removal, precise and optimal grinding out the weld shape. Dimensionally stable; optimum usage of the abrasive material in the radial section. Best results are achieved with air turbine grinders and powerful electric angle grinders.

Made in Germany

Đá mài nhám xếp POLIFAN, SGP CO CURVE -389085

Conical type, ceramic oxide CO. For fillet weld grinding, and chamfering and deburring of stainless steel (INOX) and steel. For demanding grinding applications, especially to produce fine surfaces. The ceramic grain guarantees extremely cool grinding on poorly heat-conducting materials, which means optimum grinding results without thermal damage to the workpiece.

Made in Germany

Đá mài nhám xếp hiệu năng cao FUTURO Z

Flat design, abrasives made of sharp-edged, self-sharpening zircon corundum, very well suited for steel, suitable for stainless steel. Tool for universal grinding tasks such as surface grinding and welding seam processing with a very high service life and a maximum amount of stock removal. Iron and sulphur-free.


Sales unit = pack of 10

Made in Germany

Đá mài nhám xếp hiệu năng cao FUTURO C

Conical design, abrasives made of microcrystalline, sharp-edged ceramic grain. Fast and aggressive grinding with very high cutting performance and also a greater contact surface due to extra long slats. Very well suited for tempered steels, pawl surfaces and titanium, especially good for edge grinding. Iron and sulphur-free.


Sales unit = pack of 10

Made in Germany

Đá mài nhám xếp NERIOX

Conical design, abrasives made of sharp-edged, self-sharpening zircon corundum, well suited for steel and stainless steel. Proven tool for universal grinding tasks such as surface grinding and welding seam processing with a high service life and good cutting performance. Iron and sulphur-free.
Sales unit = pack of 10

Made in Germany

Đĩa mài sợi nhôm oxit VSM -389501

With hook-and-loop fastener, without holes, paper backing, synthetic resin bonded. Ideal for plastics, wood, paint. Very good for tool steel, heat-treated steel, alloyed steels, cast steel, stainless steel (INOX).

Made in Germany

Đĩa mài mòn Corundum, 1815 siatop 115 mm -389510

The low-cost alternative to fibre discs.With hook-and-loop fastener, without holes. Zirconia alumina/semi-friable aluminium oxide on paper backing, synthetic resin bonded. For high-performance work on low carbon steel, stainless steel (INOX), titanium, non-ferrous metals, aluminium, cast iron. Very high rate of stock removal and long life, medium to hard applications.

Made in Switzerland

Đế lắp đĩa mài SIA-389542

Support plate, 103-hole for random orbital sander, with siafast hook-and-loop fastening, suitable for 7-, 9-, and 15-hole discs

Made in Switzerland

Đế lắp đĩa mài X-LOCK BOSCH -389546

X-LOCK grinding plate for use with X-LOCK abrasive fibre discs. Suitable for angle grinders with X-LOCK tool holder. Extended service life thanks to heat-resistant plastic.

Made in Switzerland

Đĩa mài sợi hiệu năng cao sia, 4581 siaramic -389620

High-performance fibre disc with ceramic grain, the optimised, triangular shape of the siaramic grain enables quick, sharp cutting especially on non-alloyed/low-alloy steels and ensures a low grinding temperature. Extra-long service life and constant, regular grinding thanks to self-sharpening ceramic grain. Ideal for the preparation and removal of weld seams, removal of scale and rolling skin, removal of discoloration and compensation of defects in metal and container construction, plant construction, mechanical engineering and shipbuilding. Star-shaped hole disc holder for X-LOCK machines, backwards-compatible with standard angle grinders. For an optimal fit with the back-up pad, the discs are delivered pre-curved and specially packed. Package of 25 pieces

Made in Germany

Đĩa mài sợi hiệu năng cao sia, 4582 siaramic -389625

High-performance fibre disc with ceramic grain, the optimised, triangular shape of the siaramic grain enables sharp, quick cutting both on non-alloyed/low-alloy steels and on stainless steels and ensures a low grinding temperature. Extra-long service life and constant, regular grinding thanks to self-sharpening ceramic grain. Ideal for the preparation and removal of weld seams, removal of scale and rolling skin, removal of discoloration and compensation of defects in metal and container construction, plant construction, mechanical engineering and shipbuilding. Star-shaped hole disc holder for X-LOCK machines, backwards-compatible with standard angle grinders. For an optimal fit with the back-up pad, the discs are delivered pre-curved and specially packed. Package of 25 pieces

Made in Germany

Đế lắp đĩa mài SUHNER-389630

Of rubber, with tightening nut, for clamping of fibre discs.

Made in Switzerland

Đế lắp đĩa mài 3M-389640

Plastic, ribbed for optimal transfer of high grinding performance, with tightening nut, for clamping fibre discs.

Made in Germany

Đĩa mài sợi hiệu năng cao back-up pad sia Turbo-Pad II -389642

sia Turbo Pad II, hard, with cooling fins, for aggressive, high-erosion, cool grinding in the coarse grain range up to K 60. Complete with M14 clamping nut, for holding fibre discs. Long service life thanks to heat-resistant, thermostable plastic. Perfect for coarse fibre discs, when maximum material removal is required.

Made in Germany