Cờ lê lực điện tử ProTronic Plus NORBAR

ProTronic Plus has all the features of the standard ProTronic versions and also offers advanced features. Equipped with Bluetooth, ProTronic Plus works with a specially developed app for even more intuitive control. All features are installed in a smaller housing with flush-mounted buttons to prevent accidental activation during use. Quick adjustment via keypad, large display, tactile and acoustic trigger signal, with tolerance value input and optical evaluation by means of green or red display

Made in United kingdom

Cờ lê lực NORBAR

Norbar Industrial, rugged industrial wrench for high torques, with adjustment scale and integrated ratchet function, with push-through square, suitable for clockwise and anti-clockwise tightening. Gentle and accurate triggering owing to response-free bending of the shank as a tangible and visible trigger signal, makes overtightening unlikely. Dust-, splash- and dirt-proof; easily readable dual scale in Nm and Ib/ft. Can be separated into two parts and packaged in this way for easier transportation. Triggering accuracy of ±4% from the set value, according to DIN EN ISO 6789, with declaration of conformity according to DIN EN ISO 6789-1:2017, in hard shell case.

Made in United kingdom

Cờ lê cân lực NORBAR-331140

Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.

Made in United kingdom

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

tag: 730n

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực HAZET

Hazet 6000-1 CT, ± 2% release accuracy of the scale value, highly precise premium measuring instruments for the heaviest demands. Robust and wear-resistant hard-chrome-plated steel tube construction in slimline design, in safe box with display. Safety locking of the handle, adjusting knob for collateral locking of the calibration, user-friendly reversible ratchet, service-friendly, integrated shift lever, adjustment of the torque value desired easily and safely by turning the handle, ergonomically shaped handle with collar reduces the risk of slipping or injury, precise, fine scale graduation.

Made in Germany

Cờ lê cân lực HAZET

Hazet 6000-1 CT, for the highest torque values, application on wind turbines, in dockyards, in the aviation and heavy industry, in the commercial vehicle industry, etc. To be disassembled two parts with release tool in carrier bag with carrying handle and shoulder strap, fast screw tightening also possible with ratchet shaft, for torque controlled tightening always use the complete wrench.

Designs:
400...1000 Nm...600...1600 Nm: Accuracy ± 3 % of the scale value
800...2000 Nm: Accuracy ± 4 % of the scale value

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMASTER® K, adjustable, clicking and rugged pipe torque wrench with integrated ratchet with square drive for industrial applications and the trade sector. Rugged, painted steel pipe construction, with galvanised ratchet and high-quality plastic parts, dual scale in Nm and lbf/ft, for controlled clockwise and anti-clockwise tightening, classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard. Quick adjustment due to offset driver (not included in scope of delivery), release system triggers a clear tactile and audible signal.

Designs:
DMK 100...DMK 300: Interchangeable mushroom head with push-button release and ball locking device
DMK 400...DMK 850: Push-through square drive with pin locking device

tag: DMK100, DMK200, DMK300, DMK400, DMK550, DMK750, DMK850

Made in Germany

Cờ lê lực chỉ kim GEDORE ADS, BDS, CDS, DDS, EDS

Gedore Torque DS, measuring and signalling torque wrench with dial gauge and multi-functional friction pointer for controlled fastening and checking of tension on existing fastenings, with dual scale in Nm and lbf-in/lbf-ft on two-tone, easily legible dial faces. With double square drive with ball locking. Built-in overload protection - mechanical stop up to 25% overload of max. value. Display is accurate to ± 4% of the displayed value, in accordance with DIN EN ISO 6789, based on national standards. The enclosure is a light, sturdy specially designed aluminium construction, painted, with wear-resistant rubber handles. Delivered with factory test certificate to DIN EN ISO 6789.

Designs:
431420.0100 ADS 4 ...431420.0500 ADS 40 : integrated ratchet function for clockwise and anti-clockwise tightening; EPA-compliant (EPA = Electrostatic Protected Area), for use in electrostatically sensitive applications, in a sturdy plastic box
431420.0600 BDS 80AS ...431420.0800 BDS 200S : with an audio-visual signal alerting the operator when the set torque is reached, integrated ratchet function for clockwise and anti-clockwise tightening, in a sturdy plastic box
431420.0900 CDS 400S ...431420.1000 DDS 800S : with an audio-visual signal alerting the operator when the set torque is reached, integrated ratchet function for clockwise and anti-clockwise tightening, in sturdy cardboard packaging
431420.1100 EDS 1400 ...431420.1200 EDS 2000 : with an audio-visual signal alerting the operator when the set torque is reached, integrated ratchet function for clockwise and anti-clockwise tightening, with two-part handle for easier storage and transport, in sturdy cardboard packaging

Made in United kingdom

Cờ lê cân lực điện tử STAHLWILLE 730 D

STAHLWILLE Manoskop 730 D combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit. Display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: 2x 1.5-V batteries, factory test certificate and case, insertion tool not included.

Designs:
331435.0100...331435.0200: in plastic case
331435.0300...331435.0700: in sheet steel box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool


Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany

Cờ lê lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case (without insert tool).

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type, with reversible ratchet socket. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: reversible ratchet socket, 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case.

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE
LT000054333 735/100 - Ratchet insert tool
Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Germany