Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening.
Anticlockwise fastening by simply rotating the mushroom head. With clearly legible scale in Nm and lbf-in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017 which also meets the requirements of ISO 9000:2000, including recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.)

Linh kiện thay thế:
331105 Ratchet spare part set NORBAR

Made in United kingdom

Cờ lê cân lực cách điện 1000V NORBAR

Norbar Insulated, 1000-volt insulation in accordance with IEC 60900:2004, automatic clicking torque wrench for controlled clockwise and anti-clockwise tightening.. Thanks to injection-moulded nylon, this torque wrench is more durable than conventional PVC-coated insulated tools. Double scale Nm and lbf/ft allows error-free and accurate setting, robust ratchet with push-through square, accuracy of ±3% from scale value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Linh kiện có thể lắp kèm:
327552 Bi-hexagon socket wrench bit FACOM OGV®
327935 Extension FACOM
328982 Bi-hexagon socket wrench bit FACOM OGV®
329105 Hex bit FACOM
329525 Extension FACOM

Made in United kingdom

Cờ lê cân lực NORBAR-331110

NORBAR Model 5, precise measurements regardless of hand position, accuracy of ±6% of the measured value, with hexagon socket 1/4" for bits, including 1/4" square coupler for socket wrench inserts, with declaration of conformity in accordance with DIN EN ISO 6789-1:2017, (ratchet not included).

Made in United kingdom

Cờ lê lực điện tử ProTronic Plus NORBAR

ProTronic Plus has all the features of the standard ProTronic versions and also offers advanced features. Equipped with Bluetooth, ProTronic Plus works with a specially developed app for even more intuitive control. All features are installed in a smaller housing with flush-mounted buttons to prevent accidental activation during use. Quick adjustment via keypad, large display, tactile and acoustic trigger signal, with tolerance value input and optical evaluation by means of green or red display

Made in United kingdom

Cờ lê cân lực GEDORE-331120

Gedore Torque TSC, with cam mechanism which prevents any overtightening, precision scale for presetting, non-reversible ratchet, clockwise, accuracy ±6% of the measured value, with factory test certificate

Made in United kingdom

Cờ lê cân lực GEDORE

Gedore Torque ATB-G, with Micrometer scale for presetting and mounting of the replaceable inserting tools, adjustment guard to prevent unintentional adjustment of the torque value, on attaining the torque value handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 6%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate.

Đầu vặn mua riêng, không kèm sản phẩm

Có thể dùng kèm các đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE

Made in United kingdom

Cờ lê cân lực GEDORE

Gedore Torque ATB, with micrometer scale for presetting and mounting of the replaceable insert tools, specially for small wrench sizes from 3.2 mm. Adjustment guard against unintentional adjustment of the torque value, on attaining the torque value the handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 6%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate.
 

Đầu vặn mua riêng, không kèm sản phẩm

Có thể dùng kèm đầu vặn:

331392 Ratchet insert GEDORE
331393 Open-end insert GEDORE
331394 Ring insert GEDORE

Made in United kingdom

Cờ lê lực NORBAR

Norbar Industrial, rugged industrial wrench for high torques, with adjustment scale and integrated ratchet function, with push-through square, suitable for clockwise and anti-clockwise tightening. Gentle and accurate triggering owing to response-free bending of the shank as a tangible and visible trigger signal, makes overtightening unlikely. Dust-, splash- and dirt-proof; easily readable dual scale in Nm and Ib/ft. Can be separated into two parts and packaged in this way for easier transportation. Triggering accuracy of ±4% from the set value, according to DIN EN ISO 6789, with declaration of conformity according to DIN EN ISO 6789-1:2017, in hard shell case.

Made in United kingdom

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực NERIOX

Automatically triggering torque wrench for controlled right-hand tightening, error-free and accurate torque pre-setting via easy-to-read laser scale, with audible and tactile signal when the pre-set torque is reached. Reversible ratchet and robust metal handle. High accuracy of the measured value according to DIN/ISO 6789-1:2017, with factory test certificate and plastic case.

Made in Germany

Cờ lê cân lực HAZET

Hazet 6000-1 CT, for the highest torque values, application on wind turbines, in dockyards, in the aviation and heavy industry, in the commercial vehicle industry, etc. To be disassembled two parts with release tool in carrier bag with carrying handle and shoulder strap, fast screw tightening also possible with ratchet shaft, for torque controlled tightening always use the complete wrench.

Designs:
400...1000 Nm...600...1600 Nm: Accuracy ± 3 % of the scale value
800...2000 Nm: Accuracy ± 4 % of the scale value

Made in Germany

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 306

Facom 306, automatic wrench slip with audible signal, precision scale for presetting, receptacle for interchangeable adapter tools. Scope of delivery: reversible ratchet insert, factory test certificate.

Designs:
1...5 Nm...5...25 Nm: Accuracy ±4 % of the scale value
20...100 Nm...70...350 Nm: Accuracy ±2 % of the scale value

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in Italy

Cờ lê cân lực FACOM 209 D

Facom 209 D, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, without reversible ratchet, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 306.M

Facom 306.M, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực FACOM

Facom 306.MF, with swivel head, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực chống tĩnh điện GEDORE TSN series

Gedore Torque TSN, ideal wrench for series production work. Unique cam mechanism prevents any overtightening - even with very fast tightening; very fine, non-reversible ratchet, light and very handy, without scale, setting using torque tester, repeatability in accordance with DIN/ISO 6789, with factory test certificate DIN EN ISO 6789.

Made in United kingdom

Cờ lê lực điện tử FACOM E.306A

Facom E.306A, for clockwise and anti-clockwise tightening, very easy operation, self-testing and zero setting upon switch-on, accuracy ±2%, ±1 digit (20% - 100% of the measuring range), 9 torque values can be preset, memory for 250 values, with USB connection, visual light and audible signal (LED and beeper), LEDs remain visible even where access is difficult; measuring mode: peak or tracking. Scope of delivery: interchangeable reversible ratchet, batteries, software and data cable, factory test certificate to ISO 6789, in plastic case.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Appropriate spare parts:
331600 Ratchet insert STAHLWILLE

Made in France

Cờ lê cân lực điện tử TOP

Features
Both right and left directions can be measured.
The LCD backlight allows you to see the measured values ​​even when working in dark places.
Measured torque values ​​(in peak hold mode) can be recorded.
The arrival of the target torque value is notified by the lighting of the LED and the sound.
With 72 gears and a ratchet drive angle of 5°, the swing width is small, making it possible to work in narrow spaces.
It is compact with a round head.
Usage
Bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.
For tightening that requires torque management, measurement of return torque, etc.

Made in Japan

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185

Made in Germany