Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening.
Anticlockwise fastening by simply rotating the mushroom head. With clearly legible scale in Nm and lbf-in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017 which also meets the requirements of ISO 9000:2000, including recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.)

Linh kiện thay thế:
331105 Ratchet spare part set NORBAR

Made in United kingdom

Cờ lê lực điện tử ProTronic Plus NORBAR

ProTronic Plus has all the features of the standard ProTronic versions and also offers advanced features. Equipped with Bluetooth, ProTronic Plus works with a specially developed app for even more intuitive control. All features are installed in a smaller housing with flush-mounted buttons to prevent accidental activation during use. Quick adjustment via keypad, large display, tactile and acoustic trigger signal, with tolerance value input and optical evaluation by means of green or red display

Made in United kingdom

Cờ lê lực NORBAR

Norbar Industrial, rugged industrial wrench for high torques, with adjustment scale and integrated ratchet function, with push-through square, suitable for clockwise and anti-clockwise tightening. Gentle and accurate triggering owing to response-free bending of the shank as a tangible and visible trigger signal, makes overtightening unlikely. Dust-, splash- and dirt-proof; easily readable dual scale in Nm and Ib/ft. Can be separated into two parts and packaged in this way for easier transportation. Triggering accuracy of ±4% from the set value, according to DIN EN ISO 6789, with declaration of conformity according to DIN EN ISO 6789-1:2017, in hard shell case.

Made in United kingdom

Cờ lê cân lực NORBAR-331140

Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.

Made in United kingdom

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening, with plug connection for mounting insert tools. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017, which also meets the requirements of ISO 9000:2000. Includes recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.). Clear scale with extremely high resolution. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Supplied without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in United kingdom

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 209 D

Facom 209 D, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, without reversible ratchet, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 306.M

Facom 306.M, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực FACOM

Facom 306.MF, with swivel head, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực GEDORE

Gedore DREMASTER® K, adjustable, clicking and rugged pipe torque wrench with integrated ratchet with square drive for industrial applications and the trade sector. Rugged, painted steel pipe construction, with galvanised ratchet and high-quality plastic parts, dual scale in Nm and lbf/ft, for controlled clockwise and anti-clockwise tightening, classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard. Quick adjustment due to offset driver (not included in scope of delivery), release system triggers a clear tactile and audible signal.

Designs:
DMK 100...DMK 300: Interchangeable mushroom head with push-button release and ball locking device
DMK 400...DMK 850: Push-through square drive with pin locking device

tag: DMK100, DMK200, DMK300, DMK400, DMK550, DMK750, DMK850

Made in Germany

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

tag: 755/4, 755/10, 755/20, 755/30

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8581, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 858101

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8586, lightweight, rugged and resistant with double-square drive, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 858601
 

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8572 F, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 857201, 8572F

Made in Germany

Cờ lê lực điện tử FACOM E.306A

Facom E.306A, for clockwise and anti-clockwise tightening, very easy operation, self-testing and zero setting upon switch-on, accuracy ±2%, ±1 digit (20% - 100% of the measuring range), 9 torque values can be preset, memory for 250 values, with USB connection, visual light and audible signal (LED and beeper), LEDs remain visible even where access is difficult; measuring mode: peak or tracking. Scope of delivery: interchangeable reversible ratchet, batteries, software and data cable, factory test certificate to ISO 6789, in plastic case.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Appropriate spare parts:
331600 Ratchet insert STAHLWILLE

Made in France

Cờ lê cân lực điện tử TOP

Features
Both right and left directions can be measured.
The LCD backlight allows you to see the measured values ​​even when working in dark places.
Measured torque values ​​(in peak hold mode) can be recorded.
The arrival of the target torque value is notified by the lighting of the LED and the sound.
With 72 gears and a ratchet drive angle of 5°, the swing width is small, making it possible to work in narrow spaces.
It is compact with a round head.
Usage
Bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.
For tightening that requires torque management, measurement of return torque, etc.

Made in Japan

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185

Made in Germany

Cờ lê cân lực Torcofix TF-K GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with integrated ratchet and square drive for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with galvanised ratchet and high-quality plastic parts. Double scale Nm and vernier scale (Nm) are protected against abrasion and contamination by the large viewing window.

Made in Germany

Cờ lê cân lực Torcofix TE-SE GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with rectangular holder for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with double scale Nm and vernier scale (Nm) which are protected against abrasion and contamination by the large viewing window

Made in Germany