Cờ lê lực

Cờ lê cân lực NORBAR

Norbar Professional, automatic clicking torque wrench for controlled clockwise tightening. With compact ratchet wrench, a clearly legible scale in Nm and lbf/in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped 2-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Each wrench is supplied with a calibration certificate according to DIN EN ISO 6789-2:2017, incl. recalibration reminder by means of TimeStrip® (= reg. trademark of TimeStrip UK Ltd.).



Linh kiện thay thế
331105 Ratchet spare part set NORBAR


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2"367
PCE

Cờ lê cân lực cách điện 1000V NORBAR

Norbar Insulated, 1000-volt insulation in accordance with IEC 60900:2004, automatic clicking torque wrench for controlled clockwise and anti-clockwise tightening.. Thanks to injection-moulded nylon, this torque wrench is more durable than conventional PVC-coated insulated tools. Double scale Nm and lbf/ft allows error-free and accurate setting, robust ratchet with push-through square, accuracy of ±3% from scale value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

 

Linh kiện có thể lắp kèm:
327552 Bi-hexagon socket wrench bit FACOM OGV®
327935 Extension FACOM
328982 Bi-hexagon socket wrench bit FACOM OGV®
329105 Hex bit FACOM
329525 Extension FACOM


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331109.0200

Cờ lê cân lực cách điện 1000V NORBAR

Phụ kiện, sản phẩm liên quan

12...601/2350
PCE

Cờ lê cân lực GEDORE-331123

Gedore Torque ATB, with Micrometer scale for presetting and permanently mounted reversible ratchet, adjustment guard to prevent unintentional adjustment of the torque value, on attaining the torque value handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 4%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2"400
PCE

Cờ lê cân lực FACOM 209 PB

Facom 209 PB, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with fixed reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch396
PCE

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

 

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:


331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Linh kiện gốc:
331600 Ratchet insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331171.0200

Cờ lê cân lực STAHLWILLE 20...100 N.m

Phụ kiện, sản phẩm liên quan

20...1001/2 & 9 x 12 mm420
PCE

331171.0600

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...6503/4 & 14 x 18 mm945
PCE

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

 

tag: 730n


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331175.0600

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...65014 x 18 mm890
PCE

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

 

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:


331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

 

Link kiện gốc:

331600 Ratchet insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331181.0400

Cờ lê cân lực STAHLWILLE 20...100 N.m

Phụ kiện, sản phẩm liên quan

20...1001/2 & 9 x 12 mm405
PCE

331181.0750

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...6503/4 & 14 x 18 mm925
PCE

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

 

 

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331182.0810

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...65014 x 18 mm875
PCE

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
130...65014 x 18 mm890
PCE

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2"375
PCE

Cờ lê cân lực NERIOX

Automatically triggering torque wrench for controlled right-hand tightening, error-free and accurate torque pre-setting via easy-to-read laser scale, with audible and tactile signal when the pre-set torque is reached. Reversible ratchet and robust metal handle. High accuracy of the measured value according to DIN/ISO 6789-1:2017, with factory test certificate and plastic case.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch410
PCE

Cờ lê cân lực BAHCO

Bahco 7455accuracy ± 4% from the scale value, suitable for use clockwise and anti-clockwise, acoustic and tactile signal when the torque is reached. Completely made of metal with mechanics closed to the outside, non-slip grip, resistant to vibrations and all common chemicals. Fixed mounted ratchet with switchover lever, tested according to DIN EN ISO 6789-2:2017 with factory test certificate.


SWEDEN

Made in Sweden

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2414
PCE

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 & 9 x 12 mm396
PCE

Cờ lê cân lực FACOM 306

Facom 306, automatic wrench slip with audible signal, precision scale for presetting, receptacle for interchangeable adapter tools. Scope of delivery: reversible ratchet insert, factory test certificate.

Designs:
1...5 Nm...5...25 Nm: Accuracy ±4 % of the scale value
20...100 Nm...70...350 Nm: Accuracy ±2 % of the scale value


Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009x12 mm & 1/2"437
PCE

Cờ lê cân lực GEDORE

Gedore DREMASTER® K, adjustable, clicking and rugged pipe torque wrench with integrated ratchet with square drive for industrial applications and the trade sector. Rugged, painted steel pipe construction, with galvanised ratchet and high-quality plastic parts, dual scale in Nm and lbf/ft, for controlled clockwise and anti-clockwise tightening, classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard. Quick adjustment due to offset driver (not included in scope of delivery), release system triggers a clear tactile and audible signal.

Designs:
DMK 100...DMK 300: Interchangeable mushroom head with push-button release and ball locking device
DMK 400...DMK 850: Push-through square drive with pin locking device

 

tag: DMK100, DMK200, DMK300, DMK400, DMK550, DMK750, DMK850


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch424
PCE

Cờ lê cân lực điện tử STAHLWILLE 730 D

STAHLWILLE Manoskop 730 D combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit. Display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: 2x 1.5-V batteries, factory test certificate and case, insertion tool not included.

Designs:
331435.0100...331435.0200: in plastic case
331435.0300...331435.0700: in sheet steel box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool


Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
65...65014 x 18 mm870
PCE

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

 

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch394
PCE

Cờ lê cân lực Torcofix TF-K GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with integrated ratchet and square drive for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with galvanised ratchet and high-quality plastic parts. Double scale Nm and vernier scale (Nm) are protected against abrasion and contamination by the large viewing window.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch400
PCE