Cờ lê cân lực FACOM 209 PB

Facom 209 PB, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with fixed reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube

Made in Italy

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

tag: 730n

Made in Germany

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 209 D

Facom 209 D, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, without reversible ratchet, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

tag: 755/4, 755/10, 755/20, 755/30

Made in Germany