Cờ lê cân lực NORBAR

Norbar Professional, automatic clicking torque wrench for controlled clockwise tightening. With compact ratchet wrench, a clearly legible scale in Nm and lbf/in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped 2-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Each wrench is supplied with a calibration certificate according to DIN EN ISO 6789-2:2017, incl. recalibration reminder by means of TimeStrip® (= reg. trademark of TimeStrip UK Ltd.).

Linh kiện thay thế
331105 Ratchet spare part set NORBAR

Made in United kingdom

Cờ lê cân lực GEDORE-331123

Gedore Torque ATB, with Micrometer scale for presetting and permanently mounted reversible ratchet, adjustment guard to prevent unintentional adjustment of the torque value, on attaining the torque value handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 4%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate

Made in United kingdom

Cờ lê cân lực FACOM 209 PB

Facom 209 PB, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with fixed reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube

Made in Italy

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực HAZET 5143-3CT

HAZET 5143-3CT, accuracy ± 3% from scale value, designed for harsh workshop use, for controlled fastening with haptic and acoustic feedback. Adjustment aid in the form of detent points means that the required torque value can be set quickly and securely by simply turning the handle. Triangle-shaped slewing ring stops the tool from rolling away unintentionally. Easy-to-read, high-contrast scale (laser inscribed), integrated switchover lever, tested in accordance with DIN EN ISO 6789-2:2017 with factory test certificate.

tag: 51433ct

Made in Germany

Cờ lê cân lực NERIOX

Automatically triggering torque wrench for controlled right-hand tightening, error-free and accurate torque pre-setting via easy-to-read laser scale, with audible and tactile signal when the pre-set torque is reached. Reversible ratchet and robust metal handle. High accuracy of the measured value according to DIN/ISO 6789-1:2017, with factory test certificate and plastic case.

Made in Germany

Cờ lê cân lực BAHCO

Bahco 7455, accuracy ± 4% from the scale value, suitable for use clockwise and anti-clockwise, acoustic and tactile signal when the torque is reached. Completely made of metal with mechanics closed to the outside, non-slip grip, resistant to vibrations and all common chemicals. Fixed mounted ratchet with switchover lever, tested according to DIN EN ISO 6789-2:2017 with factory test certificate.

Made in Sweden

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 306

Facom 306, automatic wrench slip with audible signal, precision scale for presetting, receptacle for interchangeable adapter tools. Scope of delivery: reversible ratchet insert, factory test certificate.

Designs:
1...5 Nm...5...25 Nm: Accuracy ±4 % of the scale value
20...100 Nm...70...350 Nm: Accuracy ±2 % of the scale value

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in Italy

Cờ lê cân lực FACOM

Facom 306.MF, with swivel head, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực GEDORE

Gedore DREMASTER® K, adjustable, clicking and rugged pipe torque wrench with integrated ratchet with square drive for industrial applications and the trade sector. Rugged, painted steel pipe construction, with galvanised ratchet and high-quality plastic parts, dual scale in Nm and lbf/ft, for controlled clockwise and anti-clockwise tightening, classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard. Quick adjustment due to offset driver (not included in scope of delivery), release system triggers a clear tactile and audible signal.

Designs:
DMK 100...DMK 300: Interchangeable mushroom head with push-button release and ball locking device
DMK 400...DMK 850: Push-through square drive with pin locking device

tag: DMK100, DMK200, DMK300, DMK400, DMK550, DMK750, DMK850

Made in Germany

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185

Made in Germany

Cờ lê cân lực Torcofix TF-K GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with integrated ratchet and square drive for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with galvanised ratchet and high-quality plastic parts. Double scale Nm and vernier scale (Nm) are protected against abrasion and contamination by the large viewing window.

Made in Germany