Cờ lê cân lực NORBAR

Norbar Professional, automatic clicking torque wrench for controlled clockwise tightening. With compact ratchet wrench, a clearly legible scale in Nm and lbf/in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped 2-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Each wrench is supplied with a calibration certificate according to DIN EN ISO 6789-2:2017, incl. recalibration reminder by means of TimeStrip® (= reg. trademark of TimeStrip UK Ltd.).

Linh kiện thay thế
331105 Ratchet spare part set NORBAR

Made in United kingdom

Cờ lê cân lực NORBAR-331140

Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.

Made in United kingdom

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

tag: 730n

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening, with plug connection for mounting insert tools. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017, which also meets the requirements of ISO 9000:2000. Includes recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.). Clear scale with extremely high resolution. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Supplied without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in United kingdom

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8581, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 858101

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8586, lightweight, rugged and resistant with double-square drive, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 858601
 

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE 730 D

STAHLWILLE Manoskop 730 D combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit. Display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: 2x 1.5-V batteries, factory test certificate and case, insertion tool not included.

Designs:
331435.0100...331435.0200: in plastic case
331435.0300...331435.0700: in sheet steel box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool


Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany