1900 98 68 25
sales@htgoods.com.vn
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ Chrome...
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
Số lượng
VNĐ 0 mục hàng
Cờ lê cân lực GEDORE-331120
Gedore Torque TSC, with cam mechanism which prevents any overtightening, precision scale for presetting, non-reversible ratchet, clockwise, accuracy ±6% of the measured value, with factory test certificate
Made in United kingdom
331120.0200
Xem thêm >>
Cờ lê cân lực GEDORE
Gedore Torque ATB-G, with Micrometer scale for presetting and mounting of the replaceable inserting tools, adjustment guard to prevent unintentional adjustment of the torque value, on attaining the torque value handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 6%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate.
Đầu vặn mua riêng, không kèm sản phẩm
Có thể dùng kèm các đầu vặn:
331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE
331125.0200
Phụ kiện, sản phẩm liên quan
Gedore Torque ATB, with micrometer scale for presetting and mounting of the replaceable insert tools, specially for small wrench sizes from 3.2 mm. Adjustment guard against unintentional adjustment of the torque value, on attaining the torque value the handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 6%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate.
Có thể dùng kèm đầu vặn:
331392 Ratchet insert GEDORE 331393 Open-end insert GEDORE 331394 Ring insert GEDORE
331127.0200
Cờ lê lực NORBAR
Norbar Industrial, rugged industrial wrench for high torques, with adjustment scale and integrated ratchet function, with push-through square, suitable for clockwise and anti-clockwise tightening. Gentle and accurate triggering owing to response-free bending of the shank as a tangible and visible trigger signal, makes overtightening unlikely. Dust-, splash- and dirt-proof; easily readable dual scale in Nm and Ib/ft. Can be separated into two parts and packaged in this way for easier transportation. Triggering accuracy of ±4% from the set value, according to DIN EN ISO 6789, with declaration of conformity according to DIN EN ISO 6789-1:2017, in hard shell case.
331135.0100
331135.0200
331135.0500
331135.0600
Cờ lê cân lực NORBAR-331140
Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.
331140.0300
Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N
Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.
Đầu vặn cấp riêng, KHÔNG kèm sản phẩm
331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE 331636 Open ended insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE 331656 Ring insert STAHLWILLE 732/100 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE LT000054329 735/65 - Ratchet insert tool, fine tooth LT000054333 735/100 - Ratchet insert tool LT000054346 734/100 - Square drive insert tool LT000054557 737 - Blank end insert tool LT000054573 7370/100 - Adaptor
tag: 730n
Made in Germany
331175.0800
Cờ lê cân lực STAHLWILLE 730 FIX
Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.
331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE 331636 Open ended insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE 331656 Ring insert STAHLWILLE 732/100 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth LT000054333 735/100 - Ratchet insert tool LT000054346 734/100 - Square drive insert tool LT000054557 737 - Blank end insert tool LT000054573 7370/100 - Adaptor
331185.0900
Cờ lê cân lực FUTURO
For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.
331210.0800
331210.0850
331210.1000
331210.1050
Cờ lê cân lực NERIOX
Automatically triggering torque wrench for controlled right-hand tightening, error-free and accurate torque pre-setting via easy-to-read laser scale, with audible and tactile signal when the pre-set torque is reached. Reversible ratchet and robust metal handle. High accuracy of the measured value according to DIN/ISO 6789-1:2017, with factory test certificate and plastic case.
331255.0200
Cờ lê cân lực HAZET
Hazet 6000-1 CT, for controlled clockwise fastening, with automatic close-gap release, palpably and audibly discernible when the value set is reached, easy and safe adjustment of the torque value desired by turning the handle. Designs: 1...6 Nm: Accuracy ± 4 % of the scale value 2...10 Nm...4...40 Nm: Accuracy ± 2% of the scale value
331260.0200
Hazet 6000-1 CT, for the highest torque values, application on wind turbines, in dockyards, in the aviation and heavy industry, in the commercial vehicle industry, etc. To be disassembled two parts with release tool in carrier bag with carrying handle and shoulder strap, fast screw tightening also possible with ratchet shaft, for torque controlled tightening always use the complete wrench. Designs: 400...1000 Nm...600...1600 Nm: Accuracy ± 3 % of the scale value 800...2000 Nm: Accuracy ± 4 % of the scale value
331270.0100
Hazet 6200-1 CT, with plug-and-socket to accommodate insert tools, accuracy ± 2% of the scale value. Adapter tools NOT included.
Appropriate accessories: 331602 Ratchet insert STAHLWILLE 725QR 331605 Ratchet insert HAZET 331608 Ratchet insert HAZET 331612 Ratchet insert HAZET 331617 Ratchet insert for bits HAZET 331625 Open end insert HAZET 331639 Open box insert HAZET 331645 Box insert HAZET 331681 Welding insert HAZET 331685 Insert adapter HAZET
331280.0100
Cờ lê cân lực 2...10 N.m cách điện 1000V HAZET 5108KV
The VDE tools deliver top quality and reliability for electrical work. They have been specially designed to meet the high standards of the Association of Electrical Engineering. The tools deliver maximum safety, precision and efficiency for work such as installation, repair and maintenance. Properties: • DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018 • VDE protective insulation up to 1000 V • Tolerance: 6% • Operating force min.- max. kg: 1.0–5.0 kg • Number of teeth: 24 • Operating angle of 15° • No need to turn back after use IMPORTANT: Repairs may only be carried out by the HAZET Service Centre; this is because a 10,000 V routine test must be subsequently carried out in accordance with IEC 60900.
331296.0100
Cờ lê cân lực chống tĩnh điện GEDORE TSN series
Gedore Torque TSN, ideal wrench for series production work. Unique cam mechanism prevents any overtightening - even with very fast tightening; very fine, non-reversible ratchet, light and very handy, without scale, setting using torque tester, repeatability in accordance with DIN/ISO 6789, with factory test certificate DIN EN ISO 6789.
331410.0250