Cờ lê lực NORBAR

Norbar Industrial, rugged industrial wrench for high torques, with adjustment scale and integrated ratchet function, with push-through square, suitable for clockwise and anti-clockwise tightening. Gentle and accurate triggering owing to response-free bending of the shank as a tangible and visible trigger signal, makes overtightening unlikely. Dust-, splash- and dirt-proof; easily readable dual scale in Nm and Ib/ft. Can be separated into two parts and packaged in this way for easier transportation. Triggering accuracy of ±4% from the set value, according to DIN EN ISO 6789, with declaration of conformity according to DIN EN ISO 6789-1:2017, in hard shell case.

Made in United kingdom

Cờ lê cân lực NORBAR-331140

Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.

Made in United kingdom

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

tag: 730n

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực HAZET

Hazet 6000-1 CT, for the highest torque values, application on wind turbines, in dockyards, in the aviation and heavy industry, in the commercial vehicle industry, etc. To be disassembled two parts with release tool in carrier bag with carrying handle and shoulder strap, fast screw tightening also possible with ratchet shaft, for torque controlled tightening always use the complete wrench.

Designs:
400...1000 Nm...600...1600 Nm: Accuracy ± 3 % of the scale value
800...2000 Nm: Accuracy ± 4 % of the scale value

Made in Germany

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening, with plug connection for mounting insert tools. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017, which also meets the requirements of ISO 9000:2000. Includes recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.). Clear scale with extremely high resolution. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Supplied without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in United kingdom

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

tag: 755/4, 755/10, 755/20, 755/30

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type, with reversible ratchet socket. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: reversible ratchet socket, 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case.

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE
LT000054333 735/100 - Ratchet insert tool
Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực Torcofix TE-SE GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with rectangular holder for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with double scale Nm and vernier scale (Nm) which are protected against abrasion and contamination by the large viewing window

Made in Germany