Cờ lê lực

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening.
Anticlockwise fastening by simply rotating the mushroom head. With clearly legible scale in Nm and lbf-in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017 which also meets the requirements of ISO 9000:2000, including recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.)



Linh kiện thay thế:
331105 Ratchet spare part set NORBAR


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...3001/2593
PCE

Cờ lê lực NORBAR

Norbar Industrial, rugged industrial wrench for high torques, with adjustment scale and integrated ratchet function, with push-through square, suitable for clockwise and anti-clockwise tightening. Gentle and accurate triggering owing to response-free bending of the shank as a tangible and visible trigger signal, makes overtightening unlikely. Dust-, splash- and dirt-proof; easily readable dual scale in Nm and Ib/ft. Can be separated into two parts and packaged in this way for easier transportation. Triggering accuracy of ±4% from the set value, according to DIN EN ISO 6789, with declaration of conformity according to DIN EN ISO 6789-1:2017, in hard shell case.


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
300...10001"1554
PCE

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

 

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:


331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Linh kiện gốc:
331600 Ratchet insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331171.0300

Cờ lê cân lực STAHLWILLE 25...130 N.m

Phụ kiện, sản phẩm liên quan

25...1301/2 & 14 x 18 mm465
PCE

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

 

tag: 730n


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331175.0300

Cờ lê cân lực STAHLWILLE 25...130 N.m

Phụ kiện, sản phẩm liên quan

25...13014 x 18 mm421
PCE

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

 

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:


331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

 

Link kiện gốc:

331600 Ratchet insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331181.0500

Cờ lê cân lực STAHLWILLE 25...130 N.m

Phụ kiện, sản phẩm liên quan

25...1301/2 & 14 x 18 mm459
PCE

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

 

 

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331182.0510

Cờ lê cân lực STAHLWILLE 25...130 N.m

Phụ kiện, sản phẩm liên quan

25...13014 x 18 mm410
PCE

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
25...13014 x 18 mm421
PCE

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...3001/2"590
PCE
300...10001 inch1554
PCE

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening, with plug connection for mounting insert tools. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017, which also meets the requirements of ISO 9000:2000. Includes recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.). Clear scale with extremely high resolution. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Supplied without insert tool.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...30014 x 18 mm570
PCE

Cờ lê cân lực GEDORE

Gedore DREMASTER® K, adjustable, clicking and rugged pipe torque wrench with integrated ratchet with square drive for industrial applications and the trade sector. Rugged, painted steel pipe construction, with galvanised ratchet and high-quality plastic parts, dual scale in Nm and lbf/ft, for controlled clockwise and anti-clockwise tightening, classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard. Quick adjustment due to offset driver (not included in scope of delivery), release system triggers a clear tactile and audible signal.

Designs:
DMK 100...DMK 300: Interchangeable mushroom head with push-button release and ball locking device
DMK 400...DMK 850: Push-through square drive with pin locking device

 

tag: DMK100, DMK200, DMK300, DMK400, DMK550, DMK750, DMK850


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...3001/2 inch606
PCE

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

 

tag: 755/4, 755/10, 755/20, 755/30


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...30014 x 18609
PCE

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8572 F, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

 

TAG: 857201, 8572F


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
1500...30001 1/2 inch2454
PCE

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

 

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...3001/2 inch577
PCE

Cờ lê cân lực Torcofix TF-K GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with integrated ratchet and square drive for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with galvanised ratchet and high-quality plastic parts. Double scale Nm and vernier scale (Nm) are protected against abrasion and contamination by the large viewing window.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...3001/2 inch585
PCE

Cờ lê cân lực Torcofix TE-SE GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with rectangular holder for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with double scale Nm and vernier scale (Nm) which are protected against abrasion and contamination by the large viewing window


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
60...30014 x 18 mm570
PCE