Cờ lê cân lực FACOM 209 PB

Facom 209 PB, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with fixed reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube

Made in Italy

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 306

Facom 306, automatic wrench slip with audible signal, precision scale for presetting, receptacle for interchangeable adapter tools. Scope of delivery: reversible ratchet insert, factory test certificate.

Designs:
1...5 Nm...5...25 Nm: Accuracy ±4 % of the scale value
20...100 Nm...70...350 Nm: Accuracy ±2 % of the scale value

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in Italy

Cờ lê cân lực FACOM 306.M

Facom 306.M, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực FACOM

Facom 306.MF, with swivel head, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực điện tử STAHLWILLE 730 DR

STAHLWILLE Manoskop 730 DR combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit, display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: Reversible ratchet insert, 2x 1.5-V batteries, factory test certificate and case.

Designs:
10...100 Nm...20...200 Nm: in plastic case
40...400 Nm: in sheet metal box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE 713R

STAHLWILLE Sensotork^® 713R, with angle of rotation measurement; torque and angle of rotation are visible at the same time; convenient angle measurement without reference arm in an extremely large angle range. Backlit display also for evaluation of the tightening operation (traffic-light colours) Simple and flexible operation through menu navigation on large display, particularly large measuring range (from 5% to 100% of the nominal value) with a display deviation of ± 1% of the measured value. With reversible ratchet adapter tool, with quick-release safety lock, for clockwise and anticlockwise tightening, measurement not dependent on the force application point, wide choice of different units of measurement; warning time for visual, tactile and audible signals can be set; individually adjustable adapter tool lengths; password-protected against accidental changes and unauthorized access; with data output; complies with DKD-R 3-7, class 2 and DIN EN ISO 6789.Package contents: reversible ratchet socket, 2 batteries 1.5 V, factory test certificate and case.

Designs:
3...60 Nm...10...200 Nm: in plastic case
20...400 Nm: in sheet-steel case

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE

TAG: 713R/6, 713R/20, 713R/40

Made in Germany

Cờ lê lực điện tử FACOM E.306A

Facom E.306A, for clockwise and anti-clockwise tightening, very easy operation, self-testing and zero setting upon switch-on, accuracy ±2%, ±1 digit (20% - 100% of the measuring range), 9 torque values can be preset, memory for 250 values, with USB connection, visual light and audible signal (LED and beeper), LEDs remain visible even where access is difficult; measuring mode: peak or tracking. Scope of delivery: interchangeable reversible ratchet, batteries, software and data cable, factory test certificate to ISO 6789, in plastic case.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Appropriate spare parts:
331600 Ratchet insert STAHLWILLE

Made in France

Cờ lê cân lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type, with reversible ratchet socket. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: reversible ratchet socket, 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case.

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE
LT000054333 735/100 - Ratchet insert tool
Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Germany