Cờ lê đầu khẩu USAG-323000

UNI 6749 - ISO 2236, chrome-vanadium steel, chrome-plated, angled 90°, hex socket on both ends, identical across-flats dimensions. For use on long threaded spindles, with hole for use with tommy bars.

Made in Italy

Cờ lê đầu khẩu FACOM-323010

Facom 92A, angled box spanner: for use on long threaded rods. Hole for use with pivot pins. Design: chrome-plated, satin finish.

Made in France

Cờ lê đầu khẩu FACOM-323020

Facom 76, socket driver in acc. with ISO 2236, chrome-vanadium steel, forged, drilled with through-hole, chrome-plated, satined. Solid construction for high torques. Opening in the curve for projecting threads or tommy bar (see sketch). Same across-flats dimensions, 12-point on short side, 6-point on long side.

Made in France

Cờ lê đầu khẩu FACOM

Facom 76 SLS, tool fitted with a FACOM SLS attachment solution, preventing any risk of accidental falls. The "turning" crimped cable solution, tried and tested by FACOM, preserves the ergonomics of use of the tool. Socket wrench in accordance with ISO 2236, chrome vanadium steel, forged, and drilled with through-hole, chromium-plated, satin finish. Solid design for high torques. Opening in the bend for protruding threads or tommy bar (see drawing). The same size each end, short side 12-point, long side 6-point.

Appropriate accessories:
450165 Belt, wrist bands and bags FACOM SLS
450166 Fasteners FACOM SLS
450168 Heat-shrink tubing FACOM SLS

Made in France

Cờ lê đầu khẩu KRAFTWERK-323025

Kraftwerk 2598. ISO 2236, 12 x 6 point, chrome vanadium steel, polished, with bore hole. Special offset and bore, a threaded rod or tommy bar can be inserted through, it is possible to bolt through the deep cavity even with threads protruding.

Made in Germany

Cờ lê ống tuýp FACOM 97

Facom 97, double box spanner: Wrench fully drilled through, allowing the passage of very long threaded rods. Forged hexagonal shaft allows tightening with a wrench. Hole for enabling use of tommy bars: 160A. Hex heads. 2 sizes per wrench. Design: chrome-plated, satin finish.

Made in France

Thanh vặn ngang cho cờ lê đầu khẩu FUTURO-323105

DIN 900, cylindrical, heat-treated steel, hardened, galvanized.

Made in Germany

Thanh vặn ngang cho cờ lê đầu khẩu FUTURO-323106

Like DIN 900 C, stepped, heat-treated steel, hardened, galvanized.

Made in Germany

Cờ lê đầu khẩu GEDORE-832038

Vanadium Stahl 31CrV3 Similar to DIN896 Form A, with hexagonal shaft and through hole for actuating with open-end wrench (see SW) or tommy bar (see bore), completely chrome-plated, heads polished Other dimensions available upon request.

Made in Germany

Bộ cờ lê đầu khẩu GEDORE-832039

Vanadium Stahl 31CrV3 Practical set configurations with stepped tommy bars, version as described, Content 8 pieces set: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 2 stepped tommy bars

Made in Germany

Cờ lê đầu khẩu GEDORE-832045

Vanadium Stahl 31CrV3 massive version with particularly large depth of head, 4 edges, completely chrome-plated. Our recommendations

Made in Germany