Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M PF-ZS

Aluminium oxide abrasive, shaft 6 mm, for use on power drills, die grinders, flexible cables etc. Produces a very even surface with a dense scratch pattern and high shine with low surface roughness. For fine work on flat surfaces and profiles, for cleaning, ideal on stainless steel in pressure vessels and kitchen fittings, for cleaning work in containers and tanks used in the food and beverage industry.

Made in France

Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M FF-ZS

Abrasives aluminium oxide (A, red), silicon carbide (S, grey), shaft 6 mm; for use on power drills, die grinders, flexible cables etc. Especially for cleaning and finishing work on stainless steel and non-ferrous metals. FF-ZS is a soft, adaptable brush for a fine finish; produces a fine, matt scratch pattern.

Made in Belgium

Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M CB-ZS

Combination shaft-mounted brush of non-woven material (aluminium oxide A-Fine) and abrasive flaps; shaft 6 mm. Specially designed for surface work on stainless steel (INOX), aluminium, carbon steel and non-ferrous metals. Removes surface defects, makes the scratch pattern uniformly directional; non-woven material reduces the roughness of the scratches. Constant, reproducible work result; no alteration to the shape of the workpiece.

Made in France

Chổi làm sạch sợi không dệt POLINOX®

PNZ-W, aluminium oxide A. The non-woven abrasive is arranged in radial flaps, with abrasive fabric material between the flaps. This flap arrangement permits higher rates of material removal and produces a coarser finish. Ideal for removing fine scratches, for creating a satined finish, and for fine grinding. Bore 19 mm with 2 keyways, fits all drives. Recommended speed 2000-3700 rpm.

Usable with: 470730 Angle polisher SUHNER

Made in Germany

Chổi làm sạch sợi không dệt POLINOX®

PNL-W, aluminium oxide A. The non-woven abrasive is arranged in radial flaps. The flaps are very densely packed, giving long service life. Especially for work on large surfaces. Soft version with low grain content for soft grinding and fine finish on stainless steels. For creation of matt surfaces, depending on fineness: scratch matt, silk gloss finish, satin finish.

Usable with: 470730 Angle polisher SUHNER

Made in Germany

Chổi làm sạch sợi không dệt POLINOX®

PNST, aluminium oxide A. For cleaning, deburring and fine grinding of contours and inside surfaces. Especially for tight spaces such as bores and recesses, and excellent for use in hard-to-reach places. Ø 25 mm, 2-layer; Ø 38 mm, 3-layer. Recommended cutting speed 10-20 m/s.

Appropriate accessories: 384190 Arbor

Stock packages 20 pieces

Made in Germany

Trục lắp chổi PFERD

Appropriate accessories: 384180 Cross buff POLINOX®

Made in Germany

Chổi làm sạch sợi không dệt POLISTAR

Abrasive: aluminium oxide A. POLISTAR pads are flexible tools for grinding on the inner surfaces of small holes and tubes, for cleaning, for fine and ultra-fine finishing, removing tarnish, rounding off the ingoing and outgoing sides of drilled holes, and for easy deburring of drilled holes and intersecting drilled holes. POLISTAR can be stacked in multiple layers. For safety reasons, the specified maximum speed must never be exceeded. POLISTAR are supplied in sheets.

Sheet content = minimum order quantity:Ø 20 + 30 mm = 25 piecesØ 40 + 50 mm = 10 pieces

Sales and price unit = piece

Usable with: 384213 Arbor POLISTAR

Made in Germany

Chổi làm sạch sợi không dệt POLISTAR

Reduces setup times significantly. Pads can be changed without removing the arbor from the collet mounted in the machine.

Appropriate accessories: 384210 Grinding pads POLISTAR

Made in Germany

Chổi làm sạch sợi không dệt 3M

For finish-machining and satining with high gloss, can be used on either fixed or portable machines, for deburring work, cleaning of workpieces (metal, plastics and wood), in pressure vessel construction, removal of oxide layers, decorative finish on stainless steel and non-ferrous metals; soft, adapts to shaped workpieces, more aggressive cutting performance and longer service life than CF brushes.

Appropriate accessories: 384330 Reducing flange

Made in Germany

Cặp gá lắp chổi 3M

Suitable for SCOTCH-BRITE brushes and discs, per pair. The bore of the flange can be bored out to any desired dimension. To use the brushes and discs in chucks, mounting mandresl can additionally be used.

Appropriate accessories: 485160 Mounting mandrel SCOTCH-BRITE

Usable with:

384300 Non-woven brush

384320 Non-woven brush SCOTCH-BRITE 3M CF-FB

385000 Fibre disc SCOTCH-BRITE 3M CPW

385005 Light deburring wheel SCOTCH-BRITE 3M LD-WL

385010 Fibre disc SCOTCH-BRITE 3M DB-WL

385015 Fibre disc SCOTCH-BRITE 3M X3-WL

385020 Fibre disc SCOTCH-BRITE 3M FS-WL

Made in Switzerland

Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M XL-UW

Pressed from aluminium oxide; for deburring and satining, for producing a decorative finish, satining, deburring, for fine work on stainless and acid-resistant steels, light metals, non-ferrous metals, finish-machining after cutting operations.

Usable with: 384370 Mounting mandrel

Made in Usa

Gá gắn trục 3M

For SCOTCH-BRITE wheels with bore 4.7 mm.

Appropriate accessories: 384360 Fibre disc SCOTCH-BRITE 3M XL-UW

Made in France