Cảo 2 & 3 chấu

Cảo 2 chấu càng trượt TRUSCO-2426480

Claws can slide and work is smooth


Features
The parallel movement of the claws enables smooth work, leading to increased efficiency.
The slide claw eliminates the bolt tightening work required for the normal type.
Setting work becomes easier and work efficiency improves.

 

tag: tsg80, tsg120, tsg160, tsg200


JAPAN

Made in Japan

Mã & tên hàng Độ mở (mm)Tầm với (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
30…8090
PCE
30…12090
PCE
40…160140
PCE
40…200140
PCE

Xem thêm >>


Cảo 2 hoặc 3 chấu TRUSCO-2870878

Features
The unique "claw always closes" mechanism makes it easy to attach to the pulley.
You can use 2 or 3 claws depending on the application.

 

tag: TCRV4, TCRV7


JAPAN

Made in Japan

Mã & tên hàng Độ mở (mm)Tầm với (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
76…10280
PCE
76…178130
PCE

Vam 2 chấu TOP-3690016

Features
Ideal for removing bearings from alternators from light vehicles to large vehicles (dump trucks, etc.).
The thickness of the tip of the nail is as thin as 2 mm, so it is very convenient for work in narrow spaces.
The claws and middle plate are forged, and all parts including other parts have been heat-treated.
The set screw uses a 30 ° trapezoidal screw and is strong.

 

tag: ATP3252


JAPAN

Made in Japan

Mã & tên hàng Độ mở (mm)Tầm với (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
32…5270
PCE

Cảo 3 chấu TOP-3691764

Features
A pulley pulling tool that exerts an average pulling force on three points.
It is very convenient because it can be used as 2 or 3 claws depending on the place of use.
It boasts excellent durability due to careful processing and perfect heat treatment.
Use
Pulley pulling tool with average pulling force at 3 points.

 

TAG: GP375, GP3100, GP3150


JAPAN

Made in Japan

Mã & tên hàng Độ mở (mm)Tầm với (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40…7555
PCE
50…100100
PCE
60…150150
PCE

Xem thêm >>


Cảo 2 chấu TOP-3691772

Features
By changing the holes, you can add wide gears, deep gears, etc. (GP-75 is a one-hole type.)
When tightening the set screw, the overall length has been increased so that the turning tool does not hit the claw.
The set screw is a 30 ° trapezoidal screw that allows gears to be easily removed.
A 2-jaw pulley removal tool with a large guaranteed load.
Use
A 2-jaw pulley removal tool with a large guaranteed load.

 

TAG: GP75, GP100, GP150, GP200, GP250, GP300


JAPAN

Made in Japan

Mã & tên hàng Độ mở (mm)Tầm với (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40…7555
PCE
50…100100
PCE
60…150150
PCE
80…200240
PCE
100…250275
PCE
120…300320
PCE

Xem thêm >>