1900 98 68 25
sales@htgoods.com.vn
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ Chrome...
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
Số lượng
VNĐ 0 mục hàng
Cảo 2 chấu TOP-3691772
Features By changing the holes, you can add wide gears, deep gears, etc. (GP-75 is a one-hole type.) When tightening the set screw, the overall length has been increased so that the turning tool does not hit the claw. The set screw is a 30 ° trapezoidal screw that allows gears to be easily removed. A 2-jaw pulley removal tool with a large guaranteed load. Use A 2-jaw pulley removal tool with a large guaranteed load.
TAG: GP75, GP100, GP150, GP200, GP250, GP300
Made in Japan
3691772.001
3691772.002
3691772.003
3691772.004
3691772.005
3691772.006
Xem thêm >>
Cảo 2 chấu ASTRO PRODUCTS-7587643
Features A slide-type 2-claw puller that can be used on the outside. Depending on the situation, it can also be used internally. Since the tip of the nail has a notch, it can be used by hooking it on a bolt or the like.
7587643.001
Cảo 3 chấu ARM-7766416
Features A 3-claw type that works with an average pulling force on 3 points to prevent cracking and deformation. The claws are forged from special steel, and the set screws are rolled screws for sufficient strength and durability. By attaching the claws in the opposite direction, it is possible to handle wide gears and gears in the back. You can work stably with 3 claws.
7766416.001
7766416.002
7766416.003
7766416.004
7766416.005
7766416.006
7766416.007
Cảo 2 chấu ARM-7766424
Features The claws are forged from special steel, and the set screws are rolled screws for sufficient strength and durability. By changing the position of the claw connection hole, it is possible to handle wide gears and gears in the back.
7766424.001
7766424.002
7766424.003
7766424.004
7766424.005
7766424.006
7766424.007
Cảo 2 chấu ASTRO PRODUCTS-7848374
Features A thin nail type puller. The claw is a slide type that moves independently on the left and right. Gears and bearings can be removed. With thin nails, it can be used in places where the conventional nail shape did not fit.
Product specifications Center bolt stroke length: Approximately 60 mm Center bolt screw size: 5 / 8-13 Width across flats: 14 mm Claw width: Approximately 22 mm Claw thickness: Approximately 2.5 mm Applicable pulley (mm): 30-85 Working range (mm): 70
7848374.001
Cảo 3 chấu TRUSCO-7985134
Features Ideal for pulling out bearings, pulleys, gears, etc. in the dismantling and repair of machines and automobiles. It is a 3-claw type.
tag: TGP375, TGP3100, TGP3150, TGP3200, TGP3300
7985134.001
7985134.002
7985134.003
7985134.004
7985134.005