Bơm mỡ PRESSOL

Double cuff with tight fit for oils and liquid greases, no false lubrication, sealing system with O-ring and valve ball, prevents backwards movement of the oil compressed in the oil press head. Pumping piston with high accuracy of fit in the cylinder. Filled via cap, oil press head and cap made from die-cast zinc, non-slip handle on oil press lever.

Package contents: 4-jaw, mouthpiece with ball valve, bent nozzle tube 150 mm.

Appropriate accessories:

401064 Accessories PRESSOL

Made in Czech republic

Bơm mỡ PRESSOL

The gun operates with grease up to NLGI3, ergonomic handle, slip resistant, outstanding force transmission and grip. No risk of fingers being crushed, rolled thread on the grease gun tube is insensitive to damage by impact and makes for quick and easy screwing in, plunger rod operation, T-design handle, for 400g grease cartridges or bulk grease. Available in 4 different colours, this allows for differentiating the various greases by reference to the colour of the gun. Supplied with reinforced hose M 10 x 1a, 11 x 300 mm and mouthpiece 4 BA.

Appropriate accessories:
401064 Accessories PRESSOL

Made in Czech republic

Bơm mỡ PRESSOL-401067

Makes for convenient and efficient operations. At high back pressure, lubrication can be achieved with significantly less effort by shorter strokes.

Made in Czech republic

Bơm mỡ dùng 1 tay PRESSOL

Robust one-hand grease gun for filling with 400-g cartridges or bulk grease. Grease gun head made from Z410 die-cast zinc with push rod system that can be moved and dismantled. Ergonomic, non-slip handle. The plunger can also be inserted into damaged cartridges or cartridges that do not exactly match the standard dimensions. Push rod can be locked in any position — push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify). Convertible; high pressure or high volume, easy to dismantle and high-speed ventilation.

Scope of delivery:
401155.0100 Filling nipple M10 x 1a, reinforced tube 11 x 300 mm, M10 x 1a, 4-jaw mouthpiece, M10 x 1

Appropriate accessories:
401064 Accessories PRESSOL

Made in Czech republic

Bơm mỡ khí nén PRESSOL

Robust compressed air grease gun for greases up to NLGI 2 at 20°C in 400-g cartridges or in bulk. Plunger with exact fit when using bulk grease or cartridges, pump piston with high accuracy of fit to the cylinder (no quasi-lubrication), performance remains unchanged after 40,000 actuating cycles Grease gun head made from Z410 die-cast zinc, strong knurls and handle for secure grip on the push rod. The removable cover with clamp enables manual force to be applied to the spring in any position to compress bulk grease or to force the plunger into damaged cartridges.

Scope of delivery:
401160.0100 Filling nipple M10 x 1a, bent nozzle tube 11 x 150 mm, M10 x 1, 4-jaw mouthpiece, M10 x 1

Appropriate accessories:
401064 Accessories PRESSOL

Made in Czech republic

Bơm mỡ dùng 1 tay PRESSOL

Robust single-handed grease gun for 400 g cartridges or bulk grease. Grease gun head made from Z410 die-cast zinc with push rod system that can be moved and dismantled. Ergonomic handle. The plunger can also be inserted into damaged cartridges or cartridges that do not exactly match the standard dimensions. Push rod can be locked in any position. The push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify). Convertible; high pressure or high volume, easy to dismantle and high-speed ventilation.

Scope of delivery:
401175.0100 Filling nipple M10 x 1a, nozzle tube, straight M10 x 1 x 150 mm, hydraulic mouthpiece, M10 x 1i

Appropriate accessories:
401064 Accessories PRESSOL

Made in Czech republic

Bơm mỡ chạy pin MATO

Rugged, with filling/venting valve for 400 g grease cartridges or 500 g bulk grease. With high-performance DC electric motor with planetary gear and crank drive, is limited by a pressure relief valve. Supplied with controlled quick charger with overcharging protection (2 h normal charging time), high-pressure armoured rubber hose 750 mm ( burst pressure 1.650 bar) with 4-jaw hydraulic gripper nose piece, in plastic case with a grease cartridge and an empty space for second battery

Appropriate spare parts:
401192 Accessories MATO

Made in Germany