1900 98 68 25
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tài khoản của tôi
Catalog điện tử
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
0 mục hàng
Bộ đóng vòng bi KUKKO
Set in L-BOXX, for quick and reliable installation of roller bearings with bore diameters up to 50 mm and trouble-free installation of bushes, sealing rings, pulleys and similar parts. The set contains 33 different hardened impact rings, 5 impact sleeves, which can be pushed up to 220 mm over the shaft end in question, and a backlash-free plastic hammer. The combination of impact ring and impact sleeve necessary for the specific application can be noted from the table attached to the box lid. A non-positive fit is provided by the installed O-rings. For SKF, FAG, NTN and corresponding bearings from other manufacturers.
Made in Germany
Bộ đóng vòng bi KUKKO 26...110 mm
Xem thêm >>
Bộ đóng vòng bi SIMATOOL
for the fast, precise and safe installation of roller bearings with bore diameters from 10 to 50 mm and the easy assembly of bushes, sealing rings, pulleys etc. The correct combination of impact ring and impact sleeve ensures that the installation forces are never exerted across the roller body of the bearing. Set consisting of 3 impact sleeves, 33 impact rings, 1 recoil-free nylon hammer, selection table, in plastic case.
Made in Switzerland
Bộ đóng vòng bi SIMATOOL 26...110 mm
for quick, precise and reliable installation of bearings, bushes, sealing rings, pulleys, etc., impact ring and impact sleeve ensure that the installation forces do not take effect on the rolling element, fits bearings with bore Ø 10-50 mm and external Ø up to 110 mm. Set in L-BOXX, containing impact rings, impact sleeves, hammer.
Bộ đóng vòng bi KUKKO 12...110 mm
Kukko K-71-L, compact, lightweight set for fast, precise and secure installation of small to medium-sized bearings and seals. Through a combination of impact ring and impact sleeve, the installation forces are never conducted through the rolling elements of the bearing. The impact rings are fitted with a rubber ring and ensure proper restraint in the impact sleeve. Axes, bearing housing and sealing rings of the bearings are not damaged, the combination of impact ring and impact sleeve required for the installation of the ball bearing is found in the practical table in the lid of the case.
Bộ đóng vòng bi KUKKO 26…55 mm