Thùng dụng cụ có bánh xe di chuyển

Thương hiệu

Số ngăn

Thùng dụng cụ FACOM Jet M3S

Facom Jet M3S, drawers with full extension and individual drawer retention Safety Lock System, prevents opening of several drawers at the same time. Holds 3 tool modules per drawer; extremely rugged sheet steel construction with SOFT buffers on the four corners, static load capacity 900 kg, worktop made of deep-drawn aluminium 2 mm thick reinforced with wood board 15 mm thick, fully integrated push handle, 2 side edges which retract under load with holders for 16 screwdrivers, 2 fixed edges front and back.

Central locking with folding key; 4 heavy duty wheels Ø 125 mm, 2 swivelling, 2 fixed, 1 with locking brake; epoxy-powder paintwork; side walls perforated for hanging tools on hooks or holders.

Side walls and rear wall can accommodate a variety of accessories such as holders for jerrycans, additional cabinet etc.

Tool trolley is delivered WITHOUT contents


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

439803.0400

Thùng dụng cụ FACOM Jet M3S

Phụ kiện, sản phẩm liên quan

8, JET.8GM3S774 x 546 x 971120
SET

Thùng dụng cụ 8 ngăn FACOM JET.8NM3A

Facom Jet M3A, holding capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

439815.0100

Thùng dụng cụ FACOM JET.8NM3A

Phụ kiện, sản phẩm liên quan

8814 x 575 x 1005150
PCE

Thùng dụng cụ FACOM JET.8NM3AS

Facom Jet M3AS, holding capacity of three tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Equipped with the Safety Lock System, which prevents several drawers from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
8814 x 575 x 1005-
PCE