1900 98 68 25
sales@htgoods.com.vn
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ Chrome...
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
Số lượng
VNĐ 0 mục hàng
Thùng dụng cụ FACOM Jet M3S
Facom Jet M3S, drawers with full extension and individual drawer retention Safety Lock System, prevents opening of several drawers at the same time. Holds 3 tool modules per drawer; extremely rugged sheet steel construction with SOFT buffers on the four corners, static load capacity 900 kg, worktop made of deep-drawn aluminium 2 mm thick reinforced with wood board 15 mm thick, fully integrated push handle, 2 side edges which retract under load with holders for 16 screwdrivers, 2 fixed edges front and back. Central locking with folding key; 4 heavy duty wheels Ø 125 mm, 2 swivelling, 2 fixed, 1 with locking brake; epoxy-powder paintwork; side walls perforated for hanging tools on hooks or holders. Side walls and rear wall can accommodate a variety of accessories such as holders for jerrycans, additional cabinet etc. Tool trolley is delivered WITHOUT contents
Tags: JetM3S
Made in France
439803.0400
Phụ kiện, sản phẩm liên quan
Xem thêm >>
Thùng dụng cụ 8 ngăn FACOM JET.8NM3A
Facom Jet M3A, holding capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.
Tags: JET8NM3A
439815.0100
Thùng dụng cụ FACOM JET.8NM3AS
Facom Jet M3AS, holding capacity of three tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Equipped with the Safety Lock System, which prevents several drawers from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc. Tool trolley is delivered WITHOUT contents
Tags: JET8NM3AS
439825.0100
Thùng đựng dụng cụ 8 ngăn NERIOX
Empty, Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 20 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.
Use with trays:
440346.0100 Screwdriver set module NERIOX 440345.0100 Combination wrench set module NERIOX 440344.0100 Combination ratchet wrench set module NERIOX 440342.0100 Pliers set module NERIOX 440341.0100 Locking pliers module NERIOX 440343.0100 Circlip pliers module NERIOX 440348.0100 Electronic screwdriver set module VDE NERIOX 440349.0100 Engineer's files module NERIOX 440350.0100 Hex socket wrench set module 1/2 inch NERIOX 440351.0100 Hex socket wrench set module 1/4-inch NERIOX 440352.0100 Workshop kit module NERIOX 440353.0100 Hex screwdriver set module with lateral drive NERIOX 440354.0100 Screwdriver set module with lateral drive for TORX® NERIOX 440355.0100 Chip set module NERIOX 440356.0100 Locksmith's set module NERIOX 440347.0100 Screwdriver module for TORX® screws NERIOX
Made in Italy
440491.0100
Thùng dụng cụ cách điện 113 chi tiết, cách điện 1000V WIHA 44423
Description Working on automobiles with an electric drive requires special qualifications of the employees as well as safe, certified equipment. With the Workshop trolley set eMobility, the user always has the right tool for the assembly and repair of hybrid and electric vehicles at hand. Compactly accommodated, the workshop trolley always ensures the right tool for the job thanks to a convincing range of high-quality hand tools. The majority of the hand tools offer additional safety when working on live parts thanks to their VDE-certified insulation. Distributed over five drawers, the tools are protected and are clearly arranged in precisely fitting foam inserts. Thanks to the fully extendable drawers, the tools are always easily accessible and can be used quickly. Additional storage space and the integrated 4-way power socket allow the trolley to be expanded individually, even with electrical appliances. A further advantage of the workshop trolley is the mobile working situation thanks to roller runners, which can comfortably transport up to 150 kg of contents within the workshop. At the same time, the locks on the roller runners guarantee absolute stability and steadiness. Thus the workshop trolley can be used flexibly in mobile applications, as a stable work table and as a shelf. From voltage testers to torque wrenches, from protective gloves to warning signs: with the fully equipped workshop trolley, you always have the right Wiha tool at hand.
Size 95,0 x 68,0 x 54,0 cm
Application Huge assortment of insulated tools, compiled for work on electrical vehicles.
Standards DIN EN 60900
Note Work on electric vehicles may only be carried out by qualified and authorised specialist personnel.
Made in Germany
44423.001