Thùng dụng cụ có bánh xe di chuyển

Thương hiệu

Số ngăn

Thùng dụng cụ FACOM Jet M3S

Facom Jet M3S, drawers with full extension and individual drawer retention Safety Lock System, prevents opening of several drawers at the same time. Holds 3 tool modules per drawer; extremely rugged sheet steel construction with SOFT buffers on the four corners, static load capacity 900 kg, worktop made of deep-drawn aluminium 2 mm thick reinforced with wood board 15 mm thick, fully integrated push handle, 2 side edges which retract under load with holders for 16 screwdrivers, 2 fixed edges front and back.

Central locking with folding key; 4 heavy duty wheels Ø 125 mm, 2 swivelling, 2 fixed, 1 with locking brake; epoxy-powder paintwork; side walls perforated for hanging tools on hooks or holders.

Side walls and rear wall can accommodate a variety of accessories such as holders for jerrycans, additional cabinet etc.

Tool trolley is delivered WITHOUT contents


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

439803.0200

Thùng dụng cụ FACOM JET.6GM3S

Phụ kiện, sản phẩm liên quan

6, JET.6GM3S774 x 546 x 971150
SET

439803.0400

Thùng dụng cụ FACOM JET.8GM3S

Phụ kiện, sản phẩm liên quan

8, JET.8GM3S774 x 546 x 971120
SET

Thùng dụng cụ 8 ngăn FACOM JET.8NM3A

Facom Jet M3A, holding capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

439815.0100

Thùng dụng cụ 8 ngăn FACOM JET.8NM3A

Phụ kiện, sản phẩm liên quan

8814 x 575 x 1005150
PCE

Thùng dụng cụ FACOM JET.8NM3AS

Facom Jet M3AS, holding capacity of three tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Equipped with the Safety Lock System, which prevents several drawers from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
8814 x 575 x 1005-
PCE

Thùng dụng cụ 7 ngăn FACOM Jet M4A

Facom Jet M4A with 7 drawers, capacity of 4 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
71004 x 575 x 1005-
PCE
71004 x 575 x 1005-
PCE

Thùng dụng cụ 6 ngăn FACOM JET.6NM3AS

Facom Jet M3AS, with 6 drawers, capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Featuring the Safety Lock System, which prevents more than one drawer from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents


FRANCE

Made in France

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
6814 x 575 x 1005-
PCE

Thùng đựng dụng cụ 6 ngăn NERIOX

Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 20 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.
Edge protection made of plastic


GERMANY

Made in Germany

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
6678 x 459 x 93520
SET

Thùng đựng dụng cụ 6 ngăn NERIOX

Fully equipped with tools in foam inserts, workshop trolley with a sturdy steel construction and 6 drawers, full extension with ball-bearing guide rails, load capacity per drawer 20 kg, lockable via central locking, each drawer has its own lock to prevent accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all 4 corners, 2 fixed castors and 2 swivel castors with locking brakes.


GERMANY

Made in Germany

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

440475.0050

Thùng đựng dụng cụ 6 ngăn, 116 chi tiết NERIOX

Phụ kiện, sản phẩm liên quan

6678 x 459 x 93520
SET

440475.0100

Thùng đựng dụng cụ 6 ngăn, 242 chi tiết NERIOX

Phụ kiện, sản phẩm liên quan

6678 x 459 x 93520
SET

Thùng đựng dụng cụ 6 ngăn NERIOX

Empty, Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 40 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.

 

Use with trays:

440346.0100    Screwdriver set module NERIOX     
440345.0100    Combination wrench set module NERIOX     
440344.0100    Combination ratchet wrench set module NERIOX     
440342.0100    Pliers set module NERIOX     
440341.0100    Locking pliers module NERIOX     
440343.0100    Circlip pliers module NERIOX     
440348.0100    Electronic screwdriver set module VDE NERIOX     
440349.0100    Engineer's files module NERIOX     
440350.0100    Hex socket wrench set module 1/2 inch NERIOX     
440351.0100    Hex socket wrench set module 1/4-inch NERIOX     
440352.0100    Workshop kit module NERIOX     
440353.0100    Hex screwdriver set module with lateral drive NERIOX     
440354.0100    Screwdriver set module with lateral drive for TORX® NERIOX     
440355.0100    Chip set module NERIOX     
440356.0100    Locksmith's set module NERIOX     
440347.0100    Screwdriver module for TORX® screws NERIOX     
 


ITALY

Made in Italy

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

440490.0100

Thùng đựng dụng cụ 6 ngăn NERIOX

Phụ kiện, sản phẩm liên quan

6735 x 470 x 89540
PCE

Thùng đựng dụng cụ 8 ngăn NERIOX

Empty, Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 20 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.

 

Use with trays:

440346.0100    Screwdriver set module NERIOX     
440345.0100    Combination wrench set module NERIOX     
440344.0100    Combination ratchet wrench set module NERIOX     
440342.0100    Pliers set module NERIOX     
440341.0100    Locking pliers module NERIOX     
440343.0100    Circlip pliers module NERIOX     
440348.0100    Electronic screwdriver set module VDE NERIOX     
440349.0100    Engineer's files module NERIOX     
440350.0100    Hex socket wrench set module 1/2 inch NERIOX     
440351.0100    Hex socket wrench set module 1/4-inch NERIOX     
440352.0100    Workshop kit module NERIOX     
440353.0100    Hex screwdriver set module with lateral drive NERIOX     
440354.0100    Screwdriver set module with lateral drive for TORX® NERIOX     
440355.0100    Chip set module NERIOX     
440356.0100    Locksmith's set module NERIOX     
440347.0100    Screwdriver module for TORX® screws NERIOX     
 


ITALY

Made in Italy

Mã & tên hàng Số ngănSize (W x D x H)Tải trọng mỗi ngăn Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

440491.0100

Thùng đựng dụng cụ 8 ngăn NERIOX - 440491.0100

Phụ kiện, sản phẩm liên quan

8724 x 470 x 103020
SET