1900 98 68 25
sales@htgoods.com.vn
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ Chrome...
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
Số lượng
VNĐ 0 mục hàng
Thùng dụng cụ FACOM Jet M3S
Facom Jet M3S, drawers with full extension and individual drawer retention Safety Lock System, prevents opening of several drawers at the same time. Holds 3 tool modules per drawer; extremely rugged sheet steel construction with SOFT buffers on the four corners, static load capacity 900 kg, worktop made of deep-drawn aluminium 2 mm thick reinforced with wood board 15 mm thick, fully integrated push handle, 2 side edges which retract under load with holders for 16 screwdrivers, 2 fixed edges front and back. Central locking with folding key; 4 heavy duty wheels Ø 125 mm, 2 swivelling, 2 fixed, 1 with locking brake; epoxy-powder paintwork; side walls perforated for hanging tools on hooks or holders. Side walls and rear wall can accommodate a variety of accessories such as holders for jerrycans, additional cabinet etc. Tool trolley is delivered WITHOUT contents
Made in France
439803.0200
Phụ kiện, sản phẩm liên quan
439803.0400
Xem thêm >>
Thùng dụng cụ 8 ngăn FACOM JET.8NM3A
Facom Jet M3A, holding capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.
439815.0100
Thùng dụng cụ FACOM JET.8NM3AS
Facom Jet M3AS, holding capacity of three tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Equipped with the Safety Lock System, which prevents several drawers from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc. Tool trolley is delivered WITHOUT contents
439825.0100
Thùng dụng cụ 7 ngăn FACOM Jet M4A
Facom Jet M4A with 7 drawers, capacity of 4 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc. Tool trolley is delivered WITHOUT contents
439970.0100
439970.0200
Thùng dụng cụ 6 ngăn FACOM JET.6NM3AS
Facom Jet M3AS, with 6 drawers, capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Featuring the Safety Lock System, which prevents more than one drawer from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc. Tool trolley is delivered WITHOUT contents
439980.0100
Thùng dụng cụ 6 ngăn GEDORE 1578 SL 6
Empty, hard-wearing sheet steel construction, powder-coated in GEDORIT blue, drawers GEDORIT silver, working platform in ABS with 3 compartments for small parts, handle for pushing, central locking with cylinder lock, 6 drawers which open either side, load capacity per drawer 22 kg, drawers individually partitionable with 6 lengthwise and 2 crosswise dividers included in delivery, with heel protection, high-performance wheels on roller bearings, with 2 fixed castors Ø 140 mm and 2 swivel castors Ø 100 mm, one with total brake.
Made in Austria
440321.0100
Thùng dụng cụ 7 ngăn GEDORE Workster Smartline WSL-L7
Gedore Workster Smartline WSL-L7, made from corrosion-resistant sheet steel with a scratch-proof powder coating. Wide drawers, fully extendable with individual pull-out lock, shelf body made from PP plastic with flat section at front, anti-roll safety edge and small additional trays. Good manoeuvrability with handle for easy pushing and steering. Side walls with EURO perforation 10 x 38 mm for attaching hooks and tools. Central locking with cylinder lock, ball-bearing guide rails, can be fitted with lengthways and crossways dividers as required.
Made in Germany
440335.0100
Thùng dụng cụ cách điện 113 chi tiết, cách điện 1000V WIHA 44423
Description Working on automobiles with an electric drive requires special qualifications of the employees as well as safe, certified equipment. With the Workshop trolley set eMobility, the user always has the right tool for the assembly and repair of hybrid and electric vehicles at hand. Compactly accommodated, the workshop trolley always ensures the right tool for the job thanks to a convincing range of high-quality hand tools. The majority of the hand tools offer additional safety when working on live parts thanks to their VDE-certified insulation. Distributed over five drawers, the tools are protected and are clearly arranged in precisely fitting foam inserts. Thanks to the fully extendable drawers, the tools are always easily accessible and can be used quickly. Additional storage space and the integrated 4-way power socket allow the trolley to be expanded individually, even with electrical appliances. A further advantage of the workshop trolley is the mobile working situation thanks to roller runners, which can comfortably transport up to 150 kg of contents within the workshop. At the same time, the locks on the roller runners guarantee absolute stability and steadiness. Thus the workshop trolley can be used flexibly in mobile applications, as a stable work table and as a shelf. From voltage testers to torque wrenches, from protective gloves to warning signs: with the fully equipped workshop trolley, you always have the right Wiha tool at hand.
Size 95,0 x 68,0 x 54,0 cm
Application Huge assortment of insulated tools, compiled for work on electrical vehicles.
Standards DIN EN 60900
Note Work on electric vehicles may only be carried out by qualified and authorised specialist personnel.
44423.001
Thùng dụng cụ 9 ngăn 233 chi tiết FACOM JET3.CM233GCH
Workship tuck FACOM Jet+3 with 9 drawers and 21 tool modules with 233 tools - 8 drawers, height 60 mm = 24 modules - 1 drawer, height 130 mm = 3 ,odules - supplied with 10 compartments for 60 mm high drawers - overall dimensions (including rollers and work surface): length 780 x depth 520 x height 970 mm - inside dimensions of the drawers: length 569 x depth 421 x height 60/130 mm - load per drawer & cubic capacity in litres: - 60 mm drawer: 20 kg / 15 ltr - 130 mm drawer: 25 kg / 30 ltr - static load capacity: 900 kg - 4 rollers Ø 125 mm: 2 stationary and 2 rotary, one of these with locking brake - colour: body in black 9004 21 modules - socket wrench 1/4” (MOD.R161-26) - socket wrench 3/8” (MOD.J161-36) - socket wrench 1/2“ (MOD.S161-46) - 16 combination wrenches (MOD.440-1XL) - 12 combination wrenches (MOD.467BJ12) - 4 large combination wrenches (MOD.440-2) - 8 Protwist screwdriver (MOD.AT1) - 7 Protwist Resistorx® screwdriver (MOD.ATXR) - 8 Protwist screwdriver (MOD.AT2) - 7 pin spanners with ”T grip” and spherical head (MOD.84TZSA) - 20 screw bits (MOD.E20L) - 7 pin spanners TORX® with ”T grip” (MOD.89TXA) - 2 adjustable pliers (MOD.PR12) - 3 mechanic's pliers (MOD.CPEA0) - 4 pliers for circlips (MOD.PCSN) - 11 pin punches with handle (MOD.CG) - striking tools (MOD.MI7) - measuring and testing module (MOD.LIM) - impact combination wrench 1/2” (MOD.NSI) - module for screws and small parts (PL.L384) - 6-angle socket wrench, long (MOD.HLB) - Attachment parts (7x PL.655 / 2x PL.S384)
497008.0100